Issue 3, 2018

Photoelectrocatalytic effect of unbalanced RF magnetron sputtered TiO2 thin film on ITO-coated patterned SiO2 nanocone arrays

Abstract

TiO2 has displayed potential for improved catalytic activity using a newly designed morphological system. Herein, a new catalytic system of SiO2/ITO/TiO2 nanocone array structures with unbalanced RF sputtering deposition was developed and demonstrated for photoelectrocatalytic activity. The array structures were fabricated using a soft nanolithography technique with a SiO2 sphere-patterned polydimethylsiloxane stamp. TiO2 films were coated on the ITO-coated SiO2 nanocones using unbalanced RF magnetron sputtering with various external magnetic fields applied by a solenoid. The nanostructures were examined using scanning electron microscopy, high-resolution transmission electron microscopy, X-ray diffraction crystallography, and X-ray photoelectron spectroscopy. The photocurrent response in water splitting was found to be increased by 400% for TiO2 films on nano-patterned arrays, compared with that on a flat surface. An additional increase in photocatalytic activity was achieved via TiO2 film deposition with an external magnetic field of 6 mT. This dramatic enhancement was attributed to the surface active sites created by the additional applied magnetic field and the increased surface area of the nanocone arrays.

Graphical abstract: Photoelectrocatalytic effect of unbalanced RF magnetron sputtered TiO2 thin film on ITO-coated patterned SiO2 nanocone arrays

Supplementary files

Article information

Article type
Paper
Submitted
21 Nov 2017
Accepted
12 Jan 2018
First published
12 Jan 2018

Catal. Sci. Technol., 2018,8, 898-906

Photoelectrocatalytic effect of unbalanced RF magnetron sputtered TiO2 thin film on ITO-coated patterned SiO2 nanocone arrays

G. J. Choi, H. Jung, D. H. Kim, Y. Sohn and J. S. Gwag, Catal. Sci. Technol., 2018, 8, 898 DOI: 10.1039/C7CY02371E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements