Issue 7, 2018

One-step chemical vapor deposition of MoS2 nanosheets on SiNWs as photocathodes for efficient and stable solar-driven hydrogen production

Abstract

Silicon nanowires (SiNWs) are widely used as photocathodes because of their large electrochemically available surface-area density and inherent ability to decouple light absorption from the transport of minority carriers. In order to minimize overpotential for solar-driven hydrogen (H2) production, a combination of an ultrathin molybdenum disulfide (MoS2) layer with SiNWs as photocathode has attracted much attention. Herein, for the first time, this study presents the synthesis of a composite photocathode via direct growth of ultrathin MoS2 nanosheets on SiNWs (referred to as SiNWs/MoS2) by one-step chemical vapor deposition (CVD). Due to the high surface-area density of the arrays of SiNWs, the discontinuous MoS2 nanosheets grown on the SiNWs achieved a much higher density of active sites. Moreover, the coating of MoS2 on the SiNWs was found to protect the photocathode during the photoelectrochemical (PEC) reaction. A high efficiency with photocurrent jsc of 16.5 mA cm−2 (at 0 V vs. reversible hydrogen electrode) and an excellent stability over 48 h of PEC operation were achieved under a simulated 1 sun irradiation.

Graphical abstract: One-step chemical vapor deposition of MoS2 nanosheets on SiNWs as photocathodes for efficient and stable solar-driven hydrogen production

Supplementary files

Article information

Article type
Paper
Submitted
12 Dec 2017
Accepted
18 Jan 2018
First published
18 Jan 2018

Nanoscale, 2018,10, 3518-3525

One-step chemical vapor deposition of MoS2 nanosheets on SiNWs as photocathodes for efficient and stable solar-driven hydrogen production

D. Hu, J. Xiang, Q. Zhou, S. Su, Z. Zhang, X. Wang, M. Jin, L. Nian, R. Nözel, G. Zhou, Z. Zhang and J. Liu, Nanoscale, 2018, 10, 3518 DOI: 10.1039/C7NR09235K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements