Issue 37, 2018, Issue in Progress

Reduced graphene oxide-mediated synthesis of Mn3O4 nanomaterials for an asymmetric supercapacitor cell

Abstract

Herein, Mn3O4/reduced graphene oxide composites are prepared via a facile solution-phase method for supercapacitor application. Transmission electron microscopy results reveal the uniform distribution of Mn3O4 nanoparticles on graphene layers. The morphology of the Mn3O4 nanomaterial is changed by introducing the reduced graphene oxide during the preparation process. An asymmetric supercapacitor cell based on the Mn3O4/reduced graphene oxide composite with the weight ratio of 1 : 1 exhibits relatively superior charge storage properties with higher specific capacitance and larger energy density compared with those of pure reduced graphene oxide or Mn3O4. More importantly, the long-term stability of the composite with more than 90.3% capacitance retention after 10 000 cycles can ensure that the product is widely applied in energy storage devices.

Graphical abstract: Reduced graphene oxide-mediated synthesis of Mn3O4 nanomaterials for an asymmetric supercapacitor cell

Article information

Article type
Paper
Submitted
04 Jan 2018
Accepted
10 May 2018
First published
06 Jun 2018
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2018,8, 20661-20668

Reduced graphene oxide-mediated synthesis of Mn3O4 nanomaterials for an asymmetric supercapacitor cell

M. Gao, X. Wu, H. Qiu, Q. Zhang, K. Huang, S. Feng, Y. Yang, T. Wang, B. Zhao and Z. Liu, RSC Adv., 2018, 8, 20661 DOI: 10.1039/C8RA00092A

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements