Issue 50, 2018, Issue in Progress

Graphitic carbon-wrapped NiO embedded three dimensional nitrogen doped aligned carbon nanotube arrays with long cycle life for lithium ion batteries

Abstract

In this work, a three-dimensional nitrogen doped aligned carbon nanotube array (NACNTs)@NiO@graphitic carbon composite was fabricated by an effective strategy involving nebulized ethanol assisted infiltration, In this structure, the NiO nanoparticles were wrapped by graphitic carbon layers and NiO@graphitic carbon core–shell nanoparticles adhered strictly to the surface of NACNTs to form a highly ordered 3D structure. When this composite was used as an anode for lithium ion batteries, the well-ordered pore of its NACNTs can facilitate the electrolyte to penetrate and improve electronic conductivity. At the same time, the graphitic layers can promote the stability of a solid electrolyte interface film. Therefore, the NACNTs@NiO@graphitic carbon composite containing 68.1 wt% NiO delivers excellent capacity retention of 91.6% after 200 cycles at 0.2C.

Graphical abstract: Graphitic carbon-wrapped NiO embedded three dimensional nitrogen doped aligned carbon nanotube arrays with long cycle life for lithium ion batteries

Article information

Article type
Paper
Submitted
19 Apr 2018
Accepted
30 Jul 2018
First published
09 Aug 2018
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2018,8, 28440-28446

Graphitic carbon-wrapped NiO embedded three dimensional nitrogen doped aligned carbon nanotube arrays with long cycle life for lithium ion batteries

W. Deng, X. Chen, A. Hu and S. Zhang, RSC Adv., 2018, 8, 28440 DOI: 10.1039/C8RA03352H

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements