Issue 53, 2018, Issue in Progress

Preparation of high-yield N-doped biochar from nitrogen-containing phosphate and its effective adsorption for toluene

Abstract

Novel biochar was prepared from plant-based biomass by the addition of nitrogen-containing phosphates (NCPs), including ammonia phosphate (AP), ammonia polyphosphate (APP) and urea phosphate (UP). The results demonstrated that with the addition of NCPs, the yield of biochar could be significantly increased from about 30% to up to about 60%. The pore structure of the biochar was significantly improved, and the AP-prepared biochar obtained a higher SBET and Vtot of 798 m2 g−1 and 0.464 cm3 g−1, respectively. Moreover, the surface chemistry of the NCP-prepared biochar was affected, and N heteroatoms could be successfully doped on the surface of biochar, up to 4.16%. Furthermore, through TG-FTIR and XPS analysis, some possible interactions between plant-based biomass and NCPs during the pyrolysis process were proposed to explore the mechanisms of the preparation process, including the P route and N route, in which the H3PO4 and NH3 gradually generated during the heating process played the dominant roles for the high yield N-doped biochar. All the NCP-prepared biochar presented good toluene adsorption capacities from 175.9 to 496.2 mg g−1, which were significantly higher than that of blank char (6.5 mg g−1).

Graphical abstract: Preparation of high-yield N-doped biochar from nitrogen-containing phosphate and its effective adsorption for toluene

Supplementary files

Article information

Article type
Paper
Submitted
04 Jul 2018
Accepted
19 Aug 2018
First published
28 Aug 2018
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2018,8, 30171-30179

Preparation of high-yield N-doped biochar from nitrogen-containing phosphate and its effective adsorption for toluene

Q. Zhou, X. Jiang, X. Li, C. Q. Jia and W. Jiang, RSC Adv., 2018, 8, 30171 DOI: 10.1039/C8RA05714A

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements