Issue 52, 2018

Characterization of the piezoresistance in highly doped p-type 3C-SiC at cryogenic temperatures

Abstract

This paper reports on the piezoresistive effect in p-type 3C-SiC thin film mechanical sensing at cryogenic conditions. Nanothin 3C-SiC films with a carrier concentration of 2 × 1019 cm−3 were epitaxially grown on a Si substrate using the LPCVD process, followed by photolithography and UV laser engraving processes to form SiC-on-Si pressure sensors. The magnitude of the piezoresistive effect was measured by monitoring the change of the SiC conductance subjected to pressurizing/depressurizing cycles at different temperatures. Experimental results showed a relatively stable piezoresistive effect in the highly doped 3C-SiC film with the gauge factor slightly increased by 20% at 150 K with respect to that at room temperature. The data was also in good agreement with theoretical analysis obtained based on the charge transfer phenomenon. This finding demonstrates the potential of 3C-SiC for MEMS sensors used in a large range of temperatures from cryogenic to high temperatures.

Graphical abstract: Characterization of the piezoresistance in highly doped p-type 3C-SiC at cryogenic temperatures

Supplementary files

Article information

Article type
Paper
Submitted
07 Jul 2018
Accepted
18 Aug 2018
First published
24 Aug 2018
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2018,8, 29976-29979

Characterization of the piezoresistance in highly doped p-type 3C-SiC at cryogenic temperatures

H. Phan, Karen M. Dowling, T. Nguyen, C. A. Chapin, T. Dinh, R. A. Miller, J. Han, A. Iacopi, D. G. Senesky, D. V. Dao and N. Nguyen, RSC Adv., 2018, 8, 29976 DOI: 10.1039/C8RA05797D

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements