Issue 17, 2018

Defect-rich (Co–CoS2)x@Co9S8 nanosheets derived from monomolecular precursor pyrolysis with excellent catalytic activity for hydrogen evolution reaction

Abstract

The construction of defects in two-dimensional ultrathin nanosheets will improve the activity of transition metal-based catalysts. CoSx-based electrocatalysts have attracted increasing attention because of their low cost. In this article, defect-rich, Co9S8-based ultrathin nanosheets were synthesized through direct pyrolysis of cobalt dibutyl dithiocarbamate in organic amine solvents. Edge, cavity and dislocation defects exist in the as-obtained nanosheets. The nanosheets with thickness of 4–6 nm are composed mainly of Co9S8, with small amounts of Co and CoS2. The defects on Co9S8-based nanosheets were controlled by tuning the coordination solvents and pyrolysis parameters. The optimized nanosheets with defective structures have superior catalytic activity for hydrogen evolution reaction in acid media, with a low onset potential of 228 mV and Tafel slope of 51.0 mV dec−1. The catalyst displays robust stability without obvious degradation after being employed over 16 h. The pyrolysis of monomolecular precursors in an organic system provides a new way to construct transition metal compound-based, defect-rich nanostructures for electrocatalysis and energy storage.

Graphical abstract: Defect-rich (Co–CoS2)x@Co9S8 nanosheets derived from monomolecular precursor pyrolysis with excellent catalytic activity for hydrogen evolution reaction

Supplementary files

Article information

Article type
Paper
Submitted
03 Feb 2018
Accepted
03 Apr 2018
First published
05 Apr 2018

J. Mater. Chem. A, 2018,6, 7977-7987

Defect-rich (Co–CoS2)x@Co9S8 nanosheets derived from monomolecular precursor pyrolysis with excellent catalytic activity for hydrogen evolution reaction

X. Zhang, Y. Liu, J. Gao, G. Han, M. Hu, X. Wu, H. Cao, X. Wang and B. Li, J. Mater. Chem. A, 2018, 6, 7977 DOI: 10.1039/C8TA01163J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements