Issue 14, 2018

A two-step synthesis for preparing metal microcapsules with a biodegradable polymer substrate

Abstract

Metal microcapsules have recently received attention and are being developed as improved carrier materials when compared to polymer microcapsules. In this work we have developed a novel, simplified method by which polymeric microcapsules can be synthesised using a combination of poly(vinyl pyrrolidone)-stabilised platinum nanoparticles (PVP-Pt) and poly(vinyl pyrrolidone) (PVP) as stabilisers, to allow for a secondary metal shell to be grown. We investigate the relationship between the molar ratio of reducing agent to platinum salt and the size of the resulting NPs and seek to develop further fundamental understanding of the factors governing the secondary metal shell thickness and quality, to allow production of cost-effective metal microcapsules without sacrificing core retention efficiency. We found that the size of the nanoparticles had no significant effect on secondary shell thickness, but did affect the quality of the resulting gold shells. Gold salt concentration was found to be a limiting factor in the electroless deposition of the metal shell. In this work, we have successfully produced PLGA microcapsules with more cost-effective gold shells, as thin as 56 ± 13 nm and capable of complete core retention of volatile actives.

Graphical abstract: A two-step synthesis for preparing metal microcapsules with a biodegradable polymer substrate

Supplementary files

Article information

Article type
Paper
Submitted
05 Feb 2018
Accepted
18 Mar 2018
First published
21 Mar 2018

J. Mater. Chem. B, 2018,6, 2151-2158

A two-step synthesis for preparing metal microcapsules with a biodegradable polymer substrate

A. L. Tasker, S. Puttick, J. Hitchcock, O. J. Cayre, I. Blakey, A. K. Whittaker and S. Biggs, J. Mater. Chem. B, 2018, 6, 2151 DOI: 10.1039/C8TB00348C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements