Issue 14, 2019

Rapid isolation of cfDNA from large-volume whole blood on a centrifugal microfluidic chip based on immiscible phase filtration

Abstract

Cell-free (cf) nucleic acids are considered important and have been used as selective biomarkers. Conventional techniques for cf nucleic acid biomarker isolation from blood are generally time-consuming, complicated, and expensive. This study describes a lab-on-a-disk system equipped with newly developed immiscible filtration assisted by surface tension (IFAST), which can achieve the rapid isolation of cfDNA from whole blood. The principle of centrifugal IFAST (C-IFAST) is introduced. An arch-like channel for magnetic bead transfer in the immiscible phase is designed, which builds both a virtual water–air “wall” and an air–oil “wall” to prevent the blending of water and oil. The entire process requires less than 15 min and achieves the recovery of 65% of cfDNA from plasma and 30% from whole blood. Experiments were performed to test the validity of the chip, showing that this technique takes less time to obtain results of identical quality compared to commercial kits. The proposed C-IFAST method enables rapid and reliable cfDNA isolation from large whole blood volume (4 ml) and can potentially be used in “liquid biopsy” point-of-care diagnosis.

Graphical abstract: Rapid isolation of cfDNA from large-volume whole blood on a centrifugal microfluidic chip based on immiscible phase filtration

Supplementary files

Article information

Article type
Paper
Submitted
17 Mar 2019
Accepted
08 May 2019
First published
08 May 2019

Analyst, 2019,144, 4162-4174

Rapid isolation of cfDNA from large-volume whole blood on a centrifugal microfluidic chip based on immiscible phase filtration

F. Hu, J. Li, N. Peng, Z. Li, Z. Zhang, S. Zhao, M. Duan, H. Tian, L. Li and P. Zhang, Analyst, 2019, 144, 4162 DOI: 10.1039/C9AN00493A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements