Issue 3, 2019

Solution processed infrared- and thermo-photovoltaics based on 0.7 eV bandgap PbS colloidal quantum dots

Abstract

Harnessing low energy photons is of paramount importance for multi-junction high efficiency solar cells as well as for thermo-photovoltaic applications. However, semiconductor absorbers with the bandgap lower than 0.8 eV have been limited to III–V (InGaAs) or IV (Ge) semiconductors that are characterized by high manufacturing costs and complicated lattice matching requirements in their growth and integration with higher bandgap cells. Here, we have developed solution processed low bandgap photovoltaic devices based on PbS colloidal quantum dots (CQDs) with a bandgap of 0.7 eV suited for both thermo-photovoltaics and low energy solar photon harvesting. By matching the spectral response of those cells to that of the infrared solar spectrum, we report a record high short circuit current (JSC) of 37 mA cm−2 under the full solar spectrum and 5.5 mA cm−2 when placed at the back of a silicon wafer resulting in power conversion efficiencies (PCEs) of 6.4% and 0.7%, respectively. Moreover, the device reached an above bandgap PCE of ∼6% as a thermo-photovoltaic cell recorded under a 1000 °C blackbody radiator.

Graphical abstract: Solution processed infrared- and thermo-photovoltaics based on 0.7 eV bandgap PbS colloidal quantum dots

Supplementary files

Article information

Article type
Communication
Submitted
30 Oct 2018
Accepted
12 Dec 2018
First published
12 Dec 2018

Nanoscale, 2019,11, 838-843

Solution processed infrared- and thermo-photovoltaics based on 0.7 eV bandgap PbS colloidal quantum dots

Y. Bi, A. Bertran, S. Gupta, I. Ramiro, S. Pradhan, S. Christodoulou, S. Majji, M. Z. Akgul and G. Konstantatos, Nanoscale, 2019, 11, 838 DOI: 10.1039/C8NR08755E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements