Issue 62, 2019

Sodium citrate doped polypyrrole/PS glass capillary tube sensor for ultra-small volume HCl gas detection

Abstract

A sodium citrate (SC) doped polypyrrole (PPy)/PS capillary sensor was prepared for ultra-small volume HCl gas detection. A PS film was formed in advance on the inner wall of a silica glass capillary tube, which enabled us to prepare a high-qualified PPy sensitive film inside the tube. The crystallinity, morphology, microstructure and carrier transport properties of the PPy film were characterized by XRD, SEM, FTIR and Hall effect system, respectively. The results indicated that the as-prepared tube sensor sample was able to detect 0.2 mL 30 ppm HCl gas while the plane-shaped PPy/PS sensor failed to probe. The improvement of sensing properties was attributed to the trend of crystallinity, pore (or gap) morphology and the long-narrow gas cell. The tube-like gas cell and the featured PPy/PS film of the tube sample contribute to sensing the small volume of HCl gas, which may be applied in breath analysis for potential nonintrusive disease diagnosis.

Graphical abstract: Sodium citrate doped polypyrrole/PS glass capillary tube sensor for ultra-small volume HCl gas detection

Article information

Article type
Paper
Submitted
22 Jun 2019
Accepted
24 Oct 2019
First published
08 Nov 2019
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2019,9, 36351-36357

Sodium citrate doped polypyrrole/PS glass capillary tube sensor for ultra-small volume HCl gas detection

Y. Chen, W. Zhang, C. She, G. Li, L. Zhang, S. Liu, Y. Cheng, C. Jing and J. Chu, RSC Adv., 2019, 9, 36351 DOI: 10.1039/C9RA04687A

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements