Issue 70, 2019, Issue in Progress

Effects of the aspect ratio of the conductive agent on the kinetic properties of lithium ion batteries

Abstract

We fabricated lithium-ion batteries (LIBs) using the Super P and carbon nanotubes (CNTs) as conductive agents to investigate the effect of the aspect ratio of conductive agent on the kinetic properties of LIB. The electrode fabricated with CNTs, which have a high aspect ratio (length: 200 μm), exhibited outstanding rate capability at 30C despite of their low concentration, while the electrode fabricated with the carbon black showed poor rate capability. These results indicate that the aspect ratio of conductive agent influence the diffusion coefficient of lithium ions, which is calculated from the galvanostatic intermittent titration technique analysis, and that conductive agent should have high aspect ratio to improve the kinetic properties of LIBs. This study provides insights that are useful for designing high-performance LIBs by reducing the amount of conductive agent, leading to increased loading of active material.

Graphical abstract: Effects of the aspect ratio of the conductive agent on the kinetic properties of lithium ion batteries

Supplementary files

Article information

Article type
Paper
Submitted
18 Nov 2019
Accepted
03 Dec 2019
First published
11 Dec 2019
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2019,9, 40883-40886

Effects of the aspect ratio of the conductive agent on the kinetic properties of lithium ion batteries

H. Song, Y. Oh, N. Çakmakçı and Y. Jeong, RSC Adv., 2019, 9, 40883 DOI: 10.1039/C9RA09609D

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements