Issue 11, 2020

In situ addition of Ni salt onto a skeletal Cu7S4 integrated CdS nanorod photocatalyst for efficient production of H2 under solar light irradiation

Abstract

Development of earth-abundant, low cost, skeletal-type copper sulfide superstructures plays a prominent role in various potential applications, owing to the properties of superstructures such as excellent permeability of charge and mass. In this study, we synthesized hollow superstructures of crystallinity-controlled polyhedral skeletal-type copper sulfide (Cu7S4), which were integrated with cadmium sulfide (CdS) nanorods. The photocatalytic hydrogen production by water splitting was investigated under solar light irradiation with lactic acid as a hole scavenger. The Cu7S4/CdS composite exhibited a H2 production rate of 6.25 μmol h−1, which was 3 times higher than that of CdS. Moreover, the addition of a small amount of nickel salts to the reaction solution significantly improved the activity of Cu7S4/CdS for H2 production (45 μmol h−1), which was 20 times higher than that of CdS and 7 times higher than that of Cu7S4/CdS. The enhancement of activity in Ni–Cu7S4/CdS (Cu7S4/CdS with Ni salts in the reaction solution) was attributed to the effective separation of charge carriers due to the unique properties of the skeletal-type Cu7S4 cages and the superior charge transportation of Ni salts in the reaction solution. The Cu7S4/CdS system containing Ni salts in the reaction solution is reported for photocatalytic hydrogen production for the first time, to the best of our knowledge, which promises new and inspiring research for the development of photocatalytic water splitting applications.

Graphical abstract: In situ addition of Ni salt onto a skeletal Cu7S4 integrated CdS nanorod photocatalyst for efficient production of H2 under solar light irradiation

Supplementary files

Article information

Article type
Paper
Submitted
29 Dec 2019
Accepted
03 Mar 2020
First published
03 Mar 2020

Catal. Sci. Technol., 2020,10, 3542-3551

In situ addition of Ni salt onto a skeletal Cu7S4 integrated CdS nanorod photocatalyst for efficient production of H2 under solar light irradiation

P. Bhavani, D. P. Kumar, H. S. Shim, P. Rangappa, M. Gopannagari, D. A. Reddy, J. K. Song and T. K. Kim, Catal. Sci. Technol., 2020, 10, 3542 DOI: 10.1039/C9CY02612F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements