Issue 30, 2020

Cobalt sulfide nanoflakes grown on graphite foam for Na-ion batteries with ultrahigh initial coulombic efficiency

Abstract

Sodium-ion batteries (SIBs) are regarded as promising low-cost alternatives to the prevailing lithium-ion batteries. However, most anode materials for SIBs suffer from low initial coulombic efficiency (ICE), limiting their commercial applications. Herein, we demonstrate a Na-ion anode with an extremely high ICE of 99.4%, based on cobalt sulfide (Co9S8/CoS) nanoflakes grown on graphite foam (GF) in a diglyme-based electrolyte. The achievement of such a high ICE can be ascribed to the following three aspects: (i) negligible side reactions between a diglyme-based electrolyte and Co9S8/CoS, owing to a much higher Fermi level of diglyme reduction than anode potential μA of Co9S8/CoS, which can block electron transfer from the anode to the electrolyte, (ii) highly reversible conversion reaction of Co9S8/CoS, and (iii) much lower initial capacity loss of substrate GF, compared with other sorts of carbon. The underlying rules revealed in this study serve as general guidelines in the development of sodium-ion anodes to achieve superb ICE.

Graphical abstract: Cobalt sulfide nanoflakes grown on graphite foam for Na-ion batteries with ultrahigh initial coulombic efficiency

Supplementary files

Article information

Article type
Communication
Submitted
23 Apr 2020
Accepted
19 Jun 2020
First published
20 Jun 2020

J. Mater. Chem. A, 2020,8, 14900-14907

Cobalt sulfide nanoflakes grown on graphite foam for Na-ion batteries with ultrahigh initial coulombic efficiency

H. Wang, J. Liu, H. Wang, X. Cai, X. Ye, L. Zhang, Z. Chen and Z. X. Shen, J. Mater. Chem. A, 2020, 8, 14900 DOI: 10.1039/D0TA04312E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements