Issue 28, 2020

Electro-chemo-mechanical effect in Gd-doped ceria thin films with a controlled orientation

Abstract

Gd-doped ceria (CGO) fluorite exhibits prominent electro-chemo-mechanical properties and giant-electrostriction at room temperature and has been recently disclosed in both CGO polycrystalline films and bulk. The electromechanical properties of CGO depend on the oxygen vacancy defects of the fluorite lattice. Early experiments suggest that defects along the [111] crystallographic direction promote high atomic distortion. These factors result in the largest electrostriction response ever measured. However, only out-of-plane electrostriction (i.e. M13) in (111) CGO oriented thin films has been reported so far, and several questions remain open about the electrostriction mechanism in the oxygen-defective fluorite. Here, we present electromechanical performances along different crystallographic directions. We grow thin films by pulsed laser deposition on single crystal substrates to obtain longitudinal and shear deformations (i.e. M11 and M12) of highly coherent (100), (110) and (111) oriented CGO thin films. As a result, we find an order of magnitude higher electrostriction coefficient along [100]. Such an analysis gives a new insight into the mechanism of CGO electrostriction.

Graphical abstract: Electro-chemo-mechanical effect in Gd-doped ceria thin films with a controlled orientation

Supplementary files

Article information

Article type
Paper
Submitted
31 May 2020
Accepted
29 Jun 2020
First published
30 Jun 2020
This article is Open Access
Creative Commons BY-NC license

J. Mater. Chem. A, 2020,8, 14023-14030

Electro-chemo-mechanical effect in Gd-doped ceria thin films with a controlled orientation

S. Santucci, H. Zhang, S. Sanna, N. Pryds and V. Esposito, J. Mater. Chem. A, 2020, 8, 14023 DOI: 10.1039/D0TA05500J

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements