Issue 40, 2021

The effect of interface angle on the thermal conductivity of Si/Ge superlattices

Abstract

Si/Ge superlattices (SLs) are good candidates for thermoelectric materials because of their remarkable thermal insulating performance compared with their bulk counterparts. In this paper, the non-equilibrium molecular dynamics (NEMD) simulation method was applied to investigate the thermal conductivity of Si/Ge SLs containing tilted interfaces. It was found that the thermal conductivity will be 4–5 times higher than that of other angles when the period length is 4–8 atomic layers and the interface angle is 45°. This phenomenon can be attributed to the smooth arrangement of the 45° interface which induces phonon coherent transport. Meanwhile, the thermal conductivity has not been improved due to the phonon localization although the phonons satisfy the coherent transport when the interface angle is 90°. Interestingly, the thermal conductivity is almost unchanged with the increasing interface angle when the period length is large enough which exceeds 20 atomic layers. The main reason for the unchanged thermal conductivity is due to the period length which is greater than the phonon coherence length inducing the phonon incoherent transport.

Graphical abstract: The effect of interface angle on the thermal conductivity of Si/Ge superlattices

Article information

Article type
Paper
Submitted
02 Aug 2021
Accepted
17 Sep 2021
First published
08 Oct 2021

Phys. Chem. Chem. Phys., 2021,23, 23225-23232

The effect of interface angle on the thermal conductivity of Si/Ge superlattices

Y. Liu, G. Ren, A. Chernatynskiy and X. Zhao, Phys. Chem. Chem. Phys., 2021, 23, 23225 DOI: 10.1039/D1CP03544D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements