Issue 39, 2021

Reduction in magnetic coercivity of Co nanomagnets by Fe alloying

Abstract

We measured the magnetic hysteresis and coercivity of individual Co and Co0.8Fe0.2 bilayer nano-sized island structures formed on Cu (111) substrate using spin-polarized scanning tunneling microscopy. From the hysteresis taken on various sizes of islands, we found that the alloyed islands are ferromagnetic with out-of-plane magnetic anisotropy, same as the pure islands. Coercivity of the alloy islands, which is dependent on their size, was significantly reduced to ≈40% of that of the pure islands. Based on the Stoner–Wohlfarth model, we evaluated the amount of magnetic anisotropic energy and anisotropy constant for both pure and alloy islands. Since tunneling spectra taken on the alloy islands show upward shifts of the valence electronic states as compared to the pure ones, fewer electrons populated in the valence band of the alloy islands are presumably responsible for the reduction in the magnetic anisotropic energy.

Graphical abstract: Reduction in magnetic coercivity of Co nanomagnets by Fe alloying

Article information

Article type
Paper
Submitted
27 Jul 2021
Accepted
10 Sep 2021
First published
14 Sep 2021
This article is Open Access
Creative Commons BY-NC license

Nanoscale, 2021,13, 16719-16725

Reduction in magnetic coercivity of Co nanomagnets by Fe alloying

H. Yang, C. Hsu, K. Asakawa, W. Lin and Y. Hasegawa, Nanoscale, 2021, 13, 16719 DOI: 10.1039/D1NR04862G

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements