Issue 41, 2021

Anisotropic anion exchange membranes with extremely high water uptake for water electrolysis and fuel cells

Abstract

The poor interfacial contact between an ion-conducting membrane and electrodes and the resulting sluggish mass transport have been long recognized as the hurdles for the further development of electrochemical conversion devices, especially for hydrogen energy conversion technologies such as anion exchange membrane fuel cell (AEMFC) and anion exchange membrane water electrolysis (AEMWE) technologies. Thus, mass transfer intensification at the interface between a membrane and catalyst (solid–solid interface) is one of the most essential requirements for boosting the performance of the aforementioned technologies. Here we fabricated an extremely high water uptake anion exchange membrane (HWU-AEM) with a huge swelling behavior in the through-plane direction (485.3% of original thickness), whereas that in the in-plane direction shows negligible swelling (7.8%). The anisotropic swelling behavior not only facilitates the AEM to adaptively fill the micro-gaps between the membrane and catalyst layer thereby greatly alleviating the sluggish interfacial mass transfer, but also simultaneously enables a dimensional stability of the prepared AEM. In addition, the extremely high water uptake of AEM enables an efficient water-management at the catalyst surface. Due to this design, besides an outstanding hydroxide conductivity and chemical and mechanical stability, an excellent performance of 0.911 A cm−2 at 1.9 V of AEMWE at room temperature shows preponderance in hydrogen production applications. Meanwhile, a preeminent peak power density of 1.1 W cm−2 at 80 °C is achieved when assembled in a H2/O2 fuel cell with a HWU-AEM. The HWU-AEM may provide new design principles for fuel cell, water electrolysis and other electrochemical devices, which generally suffer from sluggish heterogeneous interfacial mass transport.

Graphical abstract: Anisotropic anion exchange membranes with extremely high water uptake for water electrolysis and fuel cells

Supplementary files

Article information

Article type
Paper
Submitted
04 Aug 2021
Accepted
22 Sep 2021
First published
22 Sep 2021

J. Mater. Chem. A, 2021,9, 23485-23496

Anisotropic anion exchange membranes with extremely high water uptake for water electrolysis and fuel cells

Z. Xu, L. Wan, Y. Liao, P. Wang, K. Liu and B. Wang, J. Mater. Chem. A, 2021, 9, 23485 DOI: 10.1039/D1TA06579C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements