Issue 48, 2022

Recovery of syringic acid from aqueous solution by magnetic Fe–Zn/ZIF and its slow release from the CA-coated carrier based on the 3Rs concept

Abstract

The excessive utilization of syringic acid (SA) has caused severe environmental pollution and economic waste. Herein, from an eco-friendly perspective, a magnetic nanomaterial (Fe–Zn/ZIF) was prepared by a one-step method at room temperature. Based on the 3Rs (pollutant reduction, resource recycling, and resource reuse) concept, this carrier exhibits great potential in the adsorption and release of SA. The adsorption process of SA over Fe–Zn/ZIF can reach equilibrium at ∼360 min with a high adsorption capacity of 450.6 mg g−1, superior to those of reported adsorbents, which can be ascribed to synergistic effects of strong electrostatic attraction, H-bonding interaction, and π–π interaction. To overcome the burst release of SA–Fe–Zn/ZIF in the weak acid phenomenon, calcium alginate (CA) was selected as an encapsulation material. As expected, CA@SA–Fe–Zn/ZIF only released 30.6% of SA in the first 180 minutes at pH = 5.8, a decrease of 14.8% compared to SA–Fe–Zn/ZIF. Therefore, the magnetic carrier obtained in this work may realize deep removal and controlled release of SA.

Graphical abstract: Recovery of syringic acid from aqueous solution by magnetic Fe–Zn/ZIF and its slow release from the CA-coated carrier based on the 3Rs concept

Supplementary files

Article information

Article type
Paper
Submitted
21 Aug 2022
Accepted
27 Oct 2022
First published
25 Nov 2022

CrystEngComm, 2022,24, 8427-8433

Recovery of syringic acid from aqueous solution by magnetic Fe–Zn/ZIF and its slow release from the CA-coated carrier based on the 3Rs concept

H. Zhao, T. Wang, D. Liu and Q. Yang, CrystEngComm, 2022, 24, 8427 DOI: 10.1039/D2CE01152B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements