Issue 46, 2022

Ultra-sensitive H2S sensor based on sunflower-like In-doped ZnO with enriched oxygen vacancies

Abstract

Metal oxide sensors face the challenge of high response and fast recovery at low operating temperatures for the detection of toxic and flammable hydrogen sulfide (H2S) gases. Herein, novel In-doped ZnO with a sunflower-like structure and tunable surface properties was rationally synthesized. The substitutional In atom in the ZnO crystal can dramatically enhance the concentration of oxygen vacancies (Ov), the In–ZnO sites are responsible for fast recovery, and the formation of sub-stable sulfide intermediates gives rise to the high response towards H2S. As a result, the response of the optimized 4In–ZnO sensor is 3538.36 to 50 ppm H2S at a low operating temperature of 110 °C, which is 106 times higher than that of pristine ZnO. Moreover, the response time and recovery time to 50 ppm H2S are 100 s and 27 s, respectively, with high selectivity and stability. First-principles calculations revealed that 4In–ZnO with rich Ov exhibited higher adsorption energy for the H2S molecule than pristine ZnO, resulting in effortless H2S detection. Our work lays the foundation for the rational design of highly sensitive gas sensors through precise doping of atoms in oxygen-rich vacancies in semiconductor materials.

Graphical abstract: Ultra-sensitive H2S sensor based on sunflower-like In-doped ZnO with enriched oxygen vacancies

Supplementary files

Article information

Article type
Paper
Submitted
04 Jun 2022
Accepted
08 Nov 2022
First published
22 Nov 2022

Phys. Chem. Chem. Phys., 2022,24, 28530-28539

Ultra-sensitive H2S sensor based on sunflower-like In-doped ZnO with enriched oxygen vacancies

Y. Zhang, Y. Li, X. Yang, F. Gong, J. Chen, K. Xie, H. Zhang and S. Fang, Phys. Chem. Chem. Phys., 2022, 24, 28530 DOI: 10.1039/D2CP02539F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements