Issue 35, 2022

Two-dimensional IV–VA3 monolayers with enhanced charge mobility for high-performance solar cells

Abstract

High-performance photovoltaics (PVs) constitute a subject of extensive research efforts, in which silicon (Si)-based solar cells (SCs) have been widely commercialized. However, the low carrier mobility of Si-based SCs can limit the effective charge separation, thereby negatively impacting the device performance. Here, via calculating the physicochemical and PV performance based on density functional theory, we demonstrate SCs based on two-dimensional (2D) group IV and V compounds with an AX3 configuration. Firstly, the cleavage energies of AX3 (A = Si, Ge; X = P, As, and Sb) are calculated to be less than 1 J m−2, providing an experimental feasibility to be exfoliated from the corresponding bulk. Secondly, electronic and optical properties have been systematically investigated. To be specific, the band gap of monolayer AX3 falls in the range of 1.11–1.27 eV, which is comparable with that of Si. Significantly, the electron mobility of monolayer AX3 can reach as high as ∼30 000 cm2 V−1 s−1, which is one order of magnitude higher than that of Si. Furthermore, the optical absorbance of monolayer SiAs3, SiP3 and GeAs3 exhibits high coefficients in visible light. Therefore, we believe that our designed AX3-based PV systems with power conversion efficiency of 20% can offer great potential in the application of high-performance two-dimension-based PVs.

Graphical abstract: Two-dimensional IV–VA3 monolayers with enhanced charge mobility for high-performance solar cells

Supplementary files

Article information

Article type
Communication
Submitted
17 Jul 2022
Accepted
23 Aug 2022
First published
30 Aug 2022

Phys. Chem. Chem. Phys., 2022,24, 20694-20700

Two-dimensional IV–VA3 monolayers with enhanced charge mobility for high-performance solar cells

M. Xie, Y. Li, X. Liu, J. Yang, H. Li and X. Li, Phys. Chem. Chem. Phys., 2022, 24, 20694 DOI: 10.1039/D2CP03269D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements