Correction: Additive-mediated intercalation and surface modification of MXenes
* Corresponding authors
a
School of Environmental Ecology and Biological Engineering, School of Chemistry and Environmental Engineering, Key Laboratory of Green Chemical Engineering Process of Ministry of Education, Engineering Research Center of Phosphorus Resources Development and Utilization of Ministry of Education, Wuhan Institute of Technology, Wuhan, Hubei, P. R. China
E-mail:
027wit@163.com
b Key Laboratory of Rare Mineral, Ministry of Natural Resources, Geological Experimental Testing Center of Hubei Province, Wuhan, Hubei, P. R. China
c
Physical Science and Engineering Division, Materials Science & Engineering, King Abdullah University of Science and Technology (KAUST), Thuwal, Kingdom of Saudi Arabia
E-mail:
husam.alshareef@kaust.edu.sa
d State Key Laboratory of Urban Water Resources and Environment, School of Environment, Harbin Institute of Technology, Harbin, P. R. China
e
Institute of Advanced Materials and Flexible Electronics (IAMFE), School of Chemistry and Materials Science, Nanjing University of Information Science & Technology, Nanjing, P. R. China
E-mail:
yizhou.zhang@nuist.edu.cn
f Key Laboratory for Organic Electronics & Information Displays and Institute of Advanced Materials, Nanjing University of Posts and Telecommunications, Nanjing, P. R. China
g Institute of Chemical Biology and Nanomedicine (ICBN), State Key Laboratory of Chemo/Biosensing and Chemometrics, College of Chemistry and Chemical Engineering, Hunan University, Changsha, P. R. China
h State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, State Key Laboratory of Silicate Materials for Architectures, Wuhan University of Technology, Wuhan, Hubei, P. R. China
i Shenzhen Engineering Laboratory of Phosphorene and Optoelectronics and Key Laboratory of Optoelectronic Devices and Systems of Ministry of Education and Guangdong Province, Shenzhen University, Shenzhen, P. R. China
j
State Key Laboratory of Material Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan, Hubei, P. R. China
E-mail:
zhaity@hust.edu.cn
Abstract
Correction for ‘Additive-mediated intercalation and surface modification of MXenes’ by Jing Zou et al., Chem. Soc. Rev., 2022, DOI: 10.1039/d0cs01487g.
Please wait while we load your content...
Something went wrong. Try again?
