Issue 28, 2022

Fabrication of Fe3O4@poly(methyl methacrylate-co-glycidyl methacrylate) microspheres via miniemulsion polymerization using porous microspheres as templates for removal of cationic dyes

Abstract

Magnetic polymer microspheres have been widely used in nucleic acid extraction, immunoassays, drug screening, compound identification, wastewater treatment and catalysis. However, the particle size and magnetic material content of magnetic polymer microspheres prepared by miniemulsion polymerization cannot be effectively controlled. In this work, the porous polymer microspheres prepared by the two-step seed swelling polymerization method were used as templates. Based on it, the miniemulsion polymerization of magnetic fluid was performed to obtain magnetic Fe3O4@poly(methyl methacrylate-co-glycidyl methacrylate) (Fe3O4@P(MMA-co-GMA)) microspheres. TEM images showed that the magnetic Fe3O4@P(MMA-co-GMA) microspheres had diffuse structures. The magnetic material was scattered throughout the inside of the porous template polymer microspheres, and at the same time, polymer encapsulation of the magnetic material and functional modification of the surfaces for magnetic polymer microspheres were realized. Compared with the traditional template method, the method simplified the synthesis process, turning multiple steps into one step. Magnetic polymer microspheres with narrow particle size distribution, high magnetic material content, and different functionalized surfaces were prepared by this method. The magnetic Fe3O4@P(MMA-co-GMA) microspheres could be used to adsorb cationic dyes quickly and effectively. The results demonstrated that the maximum adsorption capacity for Nile blue was ∼109.4 mg g−1, and the maximum dye removal efficiency could reach 99.9%. In addition, Fe3O4@P(MMA-co-GMA) microspheres exhibited good stability and recyclability for Nile blue removal over seven cycles. Therefore, this work proposed a novel and facile strategy to prepare magnetic polymer microspheres, which exhibited a significant potential application value in many fields.

Graphical abstract: Fabrication of Fe3O4@poly(methyl methacrylate-co-glycidyl methacrylate) microspheres via miniemulsion polymerization using porous microspheres as templates for removal of cationic dyes

Supplementary files

Article information

Article type
Paper
Submitted
24 Mar 2022
Accepted
07 Jun 2022
First published
16 Jun 2022

New J. Chem., 2022,46, 13442-13453

Fabrication of Fe3O4@poly(methyl methacrylate-co-glycidyl methacrylate) microspheres via miniemulsion polymerization using porous microspheres as templates for removal of cationic dyes

H. Man, Y. Nie, S. Shao, Y. Wang, Z. Wang and Y. Jiang, New J. Chem., 2022, 46, 13442 DOI: 10.1039/D2NJ01440H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements