Issue 40, 2022, Issue in Progress

Detection and discrimination of sulfur dioxide using a colorimetric sensor array

Abstract

Discrimination and detection of sulfur dioxide residues in foods using a simple colorimetric array have been achieved. The difference maps before and after the reaction showed that the specific color fingerprint was related to the amount of sulfur dioxide. The results of principal component analysis (PCA), hierarchical clustering analysis (HCA) and linear discriminant analysis (LDA) demonstrated that the as-fabricated colorimetric sensor array have good performance for the discrimination of sulfur dioxide and other interferents, as well as different concentrations of sulfur dioxide. Moreover, the array has been successfully applied to determine the concentration of sulfur dioxide residues in real samples and revealed good accuracy, precision and repeatability.

Graphical abstract: Detection and discrimination of sulfur dioxide using a colorimetric sensor array

Supplementary files

Article information

Article type
Paper
Submitted
10 Jul 2022
Accepted
03 Sep 2022
First published
13 Sep 2022
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2022,12, 25852-25859

Detection and discrimination of sulfur dioxide using a colorimetric sensor array

C. Ding, Y. Ren, X. Liu, J. Zeng, X. Yu, D. Zhou and Y. Li, RSC Adv., 2022, 12, 25852 DOI: 10.1039/D2RA04251G

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements