Issue 16, 2022

β-Ga2O3 heterojunction field-effect transistors prepared via UV laser-assisted p-doping of two-dimensional WSe2

Abstract

The device applications of β-Ga2O3 semiconductors are limited by the absence of effective acceptors to form β-Ga2O3 p–n homojunctions. Herein, a WSe2/β-Ga2O3 p–n heterojunction formed by van der Waals interaction was exposed to an area-selective He–Cd UV laser (wavelength: 325 nm), increasing the hole carrier concentrations in the ambipolar WSe2 layer via the self-limited formation of WOX with a high electron affinity. The device parameters (on-resistance, on/off current ratio, and ideality factor) of the WSe2/β-Ga2O3 heterojunction p–n diode were systematically evaluated under UV laser treatment of different durations; an ideality factor of as low as 1.2 was obtained after 600 s. A β-Ga2O3 junction field-effect transistor (JFET) with a p-WSe2 heterojunction top-gate exhibited excellent transport characteristics, including a lower subthreshold swing, higher on/off output ratio, and improved field-effect carrier mobility than pristine β-Ga2O3 heterojunction FETs. Heterostructure formation by the introduction of two-dimensional p-WSe2 is an innovative method to demonstrate Ga2O3-based p–n diodes and JFETs, which can advance the applications of ultra-wide bandgap β-Ga2O3 electronic and optoelectronic devices.

Graphical abstract: β-Ga2O3 heterojunction field-effect transistors prepared via UV laser-assisted p-doping of two-dimensional WSe2

Supplementary files

Article information

Article type
Paper
Submitted
30 Dec 2021
Accepted
16 Mar 2022
First published
19 Mar 2022

J. Mater. Chem. C, 2022,10, 6281-6286

β-Ga2O3 heterojunction field-effect transistors prepared via UV laser-assisted p-doping of two-dimensional WSe2

S. Moon, J. Bae and J. Kim, J. Mater. Chem. C, 2022, 10, 6281 DOI: 10.1039/D1TC06157G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements