Issue 1, 2023

Defective graphene/SiGe heterostructures as anodes of Li-ion batteries: a first-principles calculation study

Abstract

Two-dimensional silicon-based material siligene (SiGe) has a low diffusion barrier and high theoretical specific capacity, but the conductivity drops sharply after being fully lithiated. To improve their electrical conductivity, the three heterostructures (SV-G/S, DV-G/S, and SW-G/S) formed with defective graphene and SiGe were proposed and the feasibility of them as anode materials was analyzed systematically. Based on density functional theory, the structural properties of defective graphene/SiGe heterostructures (Def-G/S), the adsorption and diffusion behaviours of Li, the voltage and theoretical capacity, and electrical conductivity during the lithiation process were investigated. The results show that defective graphene can form a stable heterostructure with SiGe and the heterostructure with defects can accommodate more Li atoms. The good adsorption and low diffusion energy barrier ensure the capacity, cycling, and safety performance of Def-G/S as anode materials. Moreover, Def-G/S significantly improves the conductivity of pristine 2D SiGe after full lithiation. These excellent properties indicate that Def-G/S has great potential as an anode material for Li-ion batteries.

Graphical abstract: Defective graphene/SiGe heterostructures as anodes of Li-ion batteries: a first-principles calculation study

Supplementary files

Article information

Article type
Paper
Submitted
31 Aug 2022
Accepted
25 Nov 2022
First published
28 Nov 2022

Phys. Chem. Chem. Phys., 2023,25, 617-624

Defective graphene/SiGe heterostructures as anodes of Li-ion batteries: a first-principles calculation study

J. Song, M. Jiang, C. Wan, H. Li, Q. Zhang, Y. Chen, X. Wu, X. Yin and J. Liu, Phys. Chem. Chem. Phys., 2023, 25, 617 DOI: 10.1039/D2CP04040A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements