Issue 4, 2023

A trifunctional N-doped activated carbon–ceria shell, derived from covalent porphyrin polymers for promoting Pt activity in fuel cell cathode performance

Abstract

Developing an active, durable and cost-effective air cathode catalyst is critical for commercializing proton exchange membrane fuel cells (PEMFCs). CeO2 has been reported as a scavenger of harmful peroxide by-products, yet it is less efficient in O2 electrocatalysis due to its insufficient electronic conductivity. In this work, a novel approach is proposed to mitigate this limitation. We prepared CeO2 nanoparticles incorporated into a porous organic polymer (POP) followed by pyrolysis with KOH to form a mixed phase of ceria and CeCx incorporated in a conducting nitrogen-doped carbon matrix (CeCx/N-doped carbon), exhibiting high porosity (1320 m2 g−1) and specific capacitance (37.7 F cm−2). Pt nanoparticles impregnated onto CeCx/N-doped carbon revealed preferential binding and nucleation with the support offering enhanced oxygen reduction reaction (ORR) activity in acid and alkaline electrolytes. Structural characterization by XRD, TEM, and XPS discloses a successful synthesis of a composite hybrid catalyst comprising Pt on CeCx and N-doped activated carbon, designated as Pt/KC@CeO2. The ORR activity in 0.5 M H2SO4 shows a higher onset (0.84 V/RHE) and limiting current density, −3.5 mA cm−2, comparable with that of commercial Pt/C. Importantly, Pt/KC@CeO2 exhibits a low peroxide yield (<1%, 0.6 V, RHE) and strong kinetics (Tafel value = −66 mV dec−1) together with 4e transfer to O2 that signifies Pt–support interaction. An accelerated durability stress test (ADST) shows negligible loss of non-faradaic current with a minimum shift (∼60 mV) in the onset potential after 5000 potential cycles, exhibiting the better durability of Pt/KC@CeO2 in an acid electrolyte. Pt/KC@CeO2 as a cathode catalyst in a H2/O2 PEMFC provided superior peak power density (0.785 W cm−2) compared to Pt/CeO2 (0.403 W cm−2) and Pt/C (0.613 W cm−2), indicating that Pt stabilized by cerium carbide containing N-doped carbon could be an interesting electrocatalyst for advanced energy research.

Graphical abstract: A trifunctional N-doped activated carbon–ceria shell, derived from covalent porphyrin polymers for promoting Pt activity in fuel cell cathode performance

Supplementary files

Article information

Article type
Paper
Submitted
26 Nov 2022
Accepted
09 Jan 2023
First published
10 Jan 2023

Catal. Sci. Technol., 2023,13, 1180-1195

A trifunctional N-doped activated carbon–ceria shell, derived from covalent porphyrin polymers for promoting Pt activity in fuel cell cathode performance

A. Modak, P. Velayudham, T. Bendikov, R. Mohan and A. Schechter, Catal. Sci. Technol., 2023, 13, 1180 DOI: 10.1039/D2CY02034C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements