Issue 23, 2023

Extending the high-performing boundaries of a fully bio-based thermal shrinkage film targeted for food packaging applications

Abstract

While modern research into biodegradable and renewable plastics has expanded to cover a wide variety of applications, some characteristics, such as desirable elastic properties, are still difficult to achieve without the use of petroleum-based monomers. In addition, 100% biomass-based polymers are in high demand as environmental regulations increasingly require the use of biomass-based monomers. In this study, biomass-derived monomers, such as adipic acid (AA), 2,5-furandicarboxylic acid (FDCA), and 1,3-propanediol (PDO), were used to synthesize terpolyesters with elastic properties. The unsymmetrical structure of FDCA led to a spiral motif that biodegrades efficiently, and its ring structure also plays an important role as a hard elastomer domain. Applying the “odd–even effect” of PDO resulted in very high biodegradation rates, low melting points, and low degrees of crystallinity. An FDCA : AA ratio of 7 : 3 led to an elongation of around 600% and a recovery rate of 89% (to the original state) at a fixed PDO concentration.

Graphical abstract: Extending the high-performing boundaries of a fully bio-based thermal shrinkage film targeted for food packaging applications

Supplementary files

Article information

Article type
Paper
Submitted
19 Jun 2023
Accepted
03 Aug 2023
First published
14 Aug 2023

Green Chem., 2023,25, 9711-9719

Extending the high-performing boundaries of a fully bio-based thermal shrinkage film targeted for food packaging applications

A. Lim, S. B. Park, Y. Choi, D. X. Oh, J. Park, H. Jeon and J. M. Koo, Green Chem., 2023, 25, 9711 DOI: 10.1039/D3GC02193A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements