Issue 20, 2023

Janus-type ionic conductive gels with single-sided adhesiveness prepared by a “one-step” method for strain/pressure sensors

Abstract

Flexible sensors have been widely studied for their huge potential applications in health monitoring, soft robots and electronic skin. However, the simple and rapid preparation of Janus-type flexible adhesive sensors with adhesive properties on one side and no adhesive properties on the other side is still a great challenge. In this work, we first used the different solubilities of silk fibroins in water and the hydrophobic ionic liquid 1-ethyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl] ([EMIM][Tf2N]) to prepare Janus-type ionic conductive gels by a “one-step” method of UV irradiation. In this system, the noncovalent bond interaction between poly(N,N-dimethylacrylamide) (PDMA) and [EMIM][Tf2N] and the substrate endows the gel with strong adhesion, and the ionic liquid [EMIM][Tf2N] endows the gel with conductivity and bactericidal properties. However, silk fibroins in ionic gels have a ladder distribution due to different solubilities and are concentrated on the other side of the gel so that the side of the gel does not have adhesion. Additionally, the β-sheet structure of silk fibroins gives the ionic gel greater toughness. Janus-type ionic conductive gels prepared by this method have super tensile properties (2671%), excellent bactericidal properties (99.99%) and strong adhesion to a variety of substrates (such as glass, rubber, metal, and plastic) and skin. Moreover, the Janus-type ionic conductive gel has excellent electromechanical properties, such as good sensitivity, low hysteresis and good repeatability, when used as a sensor and can realize multifunctional detection of the human body's various strain movements and pressure changes. Based on the simple and easy-to-operate preparation method and the endowed excellent electromechanical characteristics of the Janus-type ion-conductive gel, it has broad application prospects in the fields of multifunctional wearable sensors.

Graphical abstract: Janus-type ionic conductive gels with single-sided adhesiveness prepared by a “one-step” method for strain/pressure sensors

Supplementary files

Article information

Article type
Paper
Submitted
15 Mar 2023
Accepted
29 Apr 2023
First published
02 May 2023

J. Mater. Chem. C, 2023,11, 6627-6634

Janus-type ionic conductive gels with single-sided adhesiveness prepared by a “one-step” method for strain/pressure sensors

L. Wang, W. Xia, Y. Yu, S. Liu, Y. Peng, Z. Wu and H. Chen, J. Mater. Chem. C, 2023, 11, 6627 DOI: 10.1039/D3TC00933E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements