Issue 33, 2023

The influence of spinodal decomposition-based phase separation in a hybrid polymer hole transport layer on electroluminescent quantum dot light-emitting diodes

Abstract

Spinodal decomposition-based micro phase separation was found in a hybrid poly(9,9-dioctylfluorene-alt-N-(4-sec-butylphenyl)-diphenylamine) (TFB) and polyvinylcarbazole (PVK) system, which is used as a hole transporting layer (HTL) in atmosphere-based quantum dot (QD) light-emitting diodes (QLEDs). The micro phase separation could occur in some TFB–PVK hybrid films, leading to unexpected leakage current and poor carrier transport for the devices. A phase diagram based on the thermodynamic Flory–Huggins solution theory was established to clarify that the phase separation is based on spinodal decomposition, which is a rapid and spontaneous segregation of a single thermodynamic phase into two more stable phases without nucleation. This model clearly illustrates the hybrid TFB–PVK HTL system, showing that a hybrid polymer HTL without phase separation could significantly improve the device properties for atmosphere-based QLEDs on a glass substrate, e.g., decreased turn-on voltage by ∼47% (∼3.1 V) and increased brightness by ∼37% (∼276 000 cd m−2). Flexible atmosphere-based QLEDs with a hybrid HTL on polyimide substrates show similar results, i.e., decreased turn-on voltage by ∼30% and increased brightness by ∼133% (∼72 000 cd m−2).

Graphical abstract: The influence of spinodal decomposition-based phase separation in a hybrid polymer hole transport layer on electroluminescent quantum dot light-emitting diodes

Supplementary files

Article information

Article type
Paper
Submitted
03 May 2023
Accepted
11 Jun 2023
First published
12 Jun 2023

J. Mater. Chem. C, 2023,11, 11128-11136

The influence of spinodal decomposition-based phase separation in a hybrid polymer hole transport layer on electroluminescent quantum dot light-emitting diodes

M. Hoang, J. Lu, H. Shieh and H. Chen, J. Mater. Chem. C, 2023, 11, 11128 DOI: 10.1039/D3TC01543B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements