Intensified bioleaching of a spent Co–Mo catalyst through the addition of extracellular polymeric substances (EPSs) and its mechanism exploration

Abstract

The extraction and recovery of valuable metals from various spent catalysts via bioleaching represents a green, low-carbon and eco-friendly process. However, the pulp density of spent catalysts is usually 1.0% or lower owing to their toxicity, denoting low process capacity and poor practical potential. In this study, an intensified bioleaching strategy was used for the first time to promote the release efficiencies of both Co and Mo from a spent Co–Mo catalyst at a high pulp density of 10% by supplementing extracellular polymeric substances (EPSs). The results showed that the addition of 0.6 g L⁻¹ EPSs harvested a maximum release of 73.6% for Co and 72.5% for Mo after 9 days of contact, with an evident elevation of 22.6% for Co and 24.4% for Mo, in contrast to no addition, respectively. The added EPS not only promoted the growth of plankton cells to produce more active molecules but also boosted the adhesion of leaching cells to the spent catalyst to form stable aggregates. Moreover, the resulting aggregates allowed for the gathering and confinement of the active small molecules, including Fe³⁺ and Fe²⁺, inside the micro-areas between the spent catalysts and the cells for quick electronic transfer as an interface oxidation/reduction reaction to free both Co and Mo from the spent catalyst.