Issue 24, 2024

Direct localized growth of graphene on a substrate: a novel nickel-catalyzed CVD process assisted by H2 plasma

Abstract

An original metal catalyzed CVD methodology assisted by hydrogen plasma for the direct deposition of few-layer graphene on a substrate is presented. Graphene is grown at 900 °C directly on the surface of the substrate of technological interest by carbon diffusion through a nickel film by using methane (CH4) as the carbon precursor. Hydrogen atoms in the H2-plasma downstream are used to promote the solubilization of carbon atoms in Ni, thus favouring the growth of graphene at the Ni/substrate interface. Structural and transport properties of the as-grown multilayer graphene films on SiO2/Si and quartz substrates are provided. We demonstrate the peculiarity of this approach for controlling the thickness and transport properties of as-grown graphene films using process-step times. Finally, the potential of the proposed methodology for the bottom-up direct growth of patterned graphene is demonstrated.

Graphical abstract: Direct localized growth of graphene on a substrate: a novel nickel-catalyzed CVD process assisted by H2 plasma

Article information

Article type
Paper
Submitted
17 Jun 2024
Accepted
28 Sep 2024
First published
30 Sep 2024
This article is Open Access
Creative Commons BY-NC license

Nanoscale Adv., 2024,6, 6205-6210

Direct localized growth of graphene on a substrate: a novel nickel-catalyzed CVD process assisted by H2 plasma

G. V. Bianco, Z. Chen and G. Bruno, Nanoscale Adv., 2024, 6, 6205 DOI: 10.1039/D4NA00508B

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements