Issue 28, 2024, Issue in Progress

Preparation of HMn2O4 lithium-ion sieves with low manganese dissolution loss for improved cycling stability

Abstract

Manganese-based lithium-ion sieves have become some of the promising adsorbents for extracting Li+ from brines. However, manganese dissolution loss (MDL) severely impairs the stability and cyclicity of ion sieves. A novel ozone eluent was first developed to extract Li+ from lithium manganese oxides, which decreased MDL decreased from 5.89% to 0.11%, and after ten regeneration cycles, the adsorption capacity retained 85.39% of the initial value, which was better than 55.15% when only hydrochloric acid (HCl) was used as the eluent. Based on these phenomena, the mechanism for the O3 lowering of MDL was investigated. First, the catalytic decomposition reaction of O3 competed with the disproportionation reaction, and the involvement of O3 inhibited the occurrence of the disproportionation reaction. Additionally, the presence of O3 and reactive oxygen species provided a preferential electron acceptor compared to Mn3+ during the migration of electrons from the bulk phase to the surface. In this study, MDL was greatly reduced with a very simple strategy, and the cycling stability of the adsorbent was improved.

Graphical abstract: Preparation of HMn2O4 lithium-ion sieves with low manganese dissolution loss for improved cycling stability

Article information

Article type
Paper
Submitted
13 Apr 2024
Accepted
15 May 2024
First published
19 Jun 2024
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2024,14, 19795-19805

Preparation of HMn2O4 lithium-ion sieves with low manganese dissolution loss for improved cycling stability

L. Song, M. Liu, M. Nian and G. Yang, RSC Adv., 2024, 14, 19795 DOI: 10.1039/D4RA02757D

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements