Self-assembled monolayer engineering improves the sensitivity and response speed of high-performance perovskite photodetectors

Abstract

Perovskite photodetectors (PPDs) have attracted significant attention due to their favorable optoelectronic properties and cost effectiveness. In recent years, self-assembled monolayers (SAMs) have been demonstrated to be effective as hole transport materials for photovoltaic devices to boost both efficiency and stability. Nevertheless, research on SAM-based interface engineering to optimize the photodetection is still rarely reported. In this study, by choosing different SAMs to replace the traditional poly(bis(4-phenyl)(2,4,6-trimethylphenyl)amine) (PTAA) hole transport layer (HTL) for PPD fabrication, we find that the dark current level is more determined by the highest occupied molecular orbital (HOMO) level of HTLs, rather than the crystallinity of perovskite layers. Moreover, the SAM HTLs significantly improved the response speed of the PPDs with the tunneling hole transporting properties and enhanced built-in potential with the induced interface dipole. In comparison to the PTAA based PPDs, the dark current level of (4-(7H-dibenzo[c,g]carbazol-7-yl)butyl) phosphonic acid (4PADCB) modified devices was reduced to 1.44 × 10−9 A cm−2, the response rise/fall time was optimized from 901 ns/1.89 μs to 546/334 ns (both with an effective area of 6 mm2), and they exhibited a peak specific detectivity of 1.67 × 1013 Jones and high operational stability. These devices have been demonstrated as signal receivers in optical communication systems, presenting potential for application in light-fidelity (LiFi) networks.

Graphical abstract: Self-assembled monolayer engineering improves the sensitivity and response speed of high-performance perovskite photodetectors

Supplementary files

Transparent peer review

To support increased transparency, we offer authors the option to publish the peer review history alongside their article.

View this article’s peer review history

Article information

Article type
Communication
Submitted
12 Mar 2025
Accepted
01 Jun 2025
First published
03 Jun 2025

J. Mater. Chem. C, 2025, Advance Article

Self-assembled monolayer engineering improves the sensitivity and response speed of high-performance perovskite photodetectors

H. Hu, Y. Huang, W. Wang, Y. Yun, S. Li, L. Lu, S. Jiang, X. Chen, W. Tang, M. Chen and C. Li, J. Mater. Chem. C, 2025, Advance Article , DOI: 10.1039/D5TC01077B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements