Issue 45, 2017

Preparation and characterization of gel polymer electrolytes using poly(ionic liquids) and high lithium salt concentration ionic liquids

Abstract

Polymerized ionic liquids or poly(ionic liquids) (polyILs) have been considered as promising hosts for fabrication of gel polymer electrolytes (GPEs) containing ionic liquids. In this work, a novel GPE based on a polyIL, poly(diallyldimethylammonium) bis(trifluoromethanesulfonyl)imide (PDADMA TFSI), and a high lithium-concentration phosphonium ionic liquid, trimethyl(isobutyl)phosphonium bis(fluorosulfonyl)imide (P111i4FSI), is prepared. The composition-dependent behaviour of the GPEs is investigated by differential scanning calorimetry (DSC), electrochemical impedance spectroscopy (EIS) and solid-state nuclear magnetic resonance (solid-state NMR). The effects of Al2O3 nano-particles on the polymer electrolyte properties are also discussed. It is shown that the introduction of high lithium-concentration ionic liquids into the polyIL can effectively decrease the glass transition temperature (Tg) of the resulting GPE, leading to improved ion dynamics and higher ionic conductivity. The Al2O3 nano-particles effectively enhanced the mechanical stability of the GPEs. Most importantly, although adding PDADMA TFSI to the ionic liquids decreases the diffusion coefficient of both Li+ and anions, a greater decrease in the anion diffusion is observed, resulting in a higher Li+ transport number (as evaluated by NMR) than that seen in the original ILs. Finally, a highly conductive free-standing GPE membrane is fabricated, and extremely stable lithium symmetrical cell performance is demonstrated.

Graphical abstract: Preparation and characterization of gel polymer electrolytes using poly(ionic liquids) and high lithium salt concentration ionic liquids

Supplementary files

Article information

Article type
Paper
Submitted
18 sep. 2017
Accepted
02 nóv. 2017
First published
02 nóv. 2017

J. Mater. Chem. A, 2017,5, 23844-23852

Preparation and characterization of gel polymer electrolytes using poly(ionic liquids) and high lithium salt concentration ionic liquids

X. Wang, H. Zhu, Gaetan M. A. Girard, R. Yunis, D. R. MacFarlane, D. Mecerreyes, A. J. Bhattacharyya, P. C. Howlett and M. Forsyth, J. Mater. Chem. A, 2017, 5, 23844 DOI: 10.1039/C7TA08233A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements