Issue 22, 2022

Thermally activated delayed fluorescence dendrimers achieving 20% external quantum efficiency for solution-processed OLEDs

Abstract

Two multi-carbazole-encapsulated TADF dendrimers were obtained by coupling tercarbazole (tBuTCz or MeOTCz) and di(pyridin-3-yl)methanone (DPyM) units. Both tBuTCz-DPyM and MeOTCz-DPyM show small singlet–triplet energy gap (ΔEST) values (0.01 vs. 0.02 eV) and high photoluminescence quantum yield (PLQY) values (66.2 vs. 55.0%). High-performance solution-processed OLEDs based on tBuTCz-DPyM and MeOTCz-DPyM as the emissive layer were fabricated. The tBuTCz-DPyM-based solution-processed device exhibited a maximum current efficiency (CEmax) of 52.6 cd A−1, a maximum external quantum efficiency (EQEmax) of 20.4% and a maximum luminance (Lmax) of 6165 cd m−2 with a low turn-on voltage of 3.2 V. The MeOTCz-DPyM-based solution-processed device also showed an efficient performance with a CEmax of 27.0 cd A−1, an EQEmax of 9.2%, an Lmax of 8169 cd m−2 and a low turn-on voltage of 3.4 V. The tBuTCz-DPyM-based device (I) and the MeOTCz-DPyM-based device (II) show Commission internationale de l'éclairage (CIE) coordinates of (0.25, 0.48) and (0.37, 0.54), respectively. Both tBuTCz-DPyM and MeOTCz-DPyM demonstrate a high performance among solution-processed OLEDs with TADF dendrimers.

Graphical abstract: Thermally activated delayed fluorescence dendrimers achieving 20% external quantum efficiency for solution-processed OLEDs

Supplementary files

Article information

Article type
Research Article
Submitted
17 ágú. 2022
Accepted
27 sep. 2022
First published
28 sep. 2022

Mater. Chem. Front., 2022,6, 3442-3449

Thermally activated delayed fluorescence dendrimers achieving 20% external quantum efficiency for solution-processed OLEDs

C. Zhang, H. Yan, Y. He, Y. Chai and D. Zhou, Mater. Chem. Front., 2022, 6, 3442 DOI: 10.1039/D2QM00833E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements