Issue 36, 2024

A polyacrylamide/gelatin/tannic acid-modified carbon nanotube double network hydrogel with skin temperature-triggered adhesion and high sensitivity for wearable sensors

Abstract

Flexible wearable devices based on conductive hydrogels have received widespread attention. However, the poor mechanical properties, weak adhesion and low sensitivity of traditional hydrogels greatly limit their practical applications. In this study, a polyacrylamide/gelatin/tannic acid-modified carbon nanotube (PAM/gelatin/TA-CNT) double network conductive hydrogel with skin temperature-triggered adhesion and low-temperature-triggered detachment was constructed via a simple one-pot method using polyacrylamide (PAM) and gelatin as the main components, and tannic acid (TA)-modified carbon nanotubes (CNTs) as the conductive filler. The resulting hydrogel has various functions such as excellent mechanical properties, high sensitivity (GF value was 5.50), wide strain detection range and excellent fatigue resistance. Flexible strain sensors based on this hydrogel can provide real-time and stable monitoring of human physiological activities over a wide strain range. In addition, its assembly into a pressure sensor can also realize information encryption and transmission.

Graphical abstract: A polyacrylamide/gelatin/tannic acid-modified carbon nanotube double network hydrogel with skin temperature-triggered adhesion and high sensitivity for wearable sensors

Supplementary files

Article information

Article type
Paper
Submitted
09 júl. 2024
Accepted
31 júl. 2024
First published
01 ágú. 2024

J. Mater. Chem. C, 2024,12, 14330-14342

A polyacrylamide/gelatin/tannic acid-modified carbon nanotube double network hydrogel with skin temperature-triggered adhesion and high sensitivity for wearable sensors

W. Liu, K. Wang, Z. Zhao, J. Yan, C. Zhang, S. Ma, J. Wang, W. Guo and J. Wang, J. Mater. Chem. C, 2024, 12, 14330 DOI: 10.1039/D4TC02900C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements