Investigation of ternary metal dodecaborides (M1M2M3)B12 (M1, M2 and M3 = Zr, Y, Hf and Gd)

Georgiy Akopov; Inwhan Roh; Zachary C. Sobell; Michael T. Yeung; Richard B. Kaner

doi:10.1039/C8DT00563J

Investigation of ternary metal dodecaborides (M₁M₂M₃)B₁₂ (M₁, M₂ and M₃ = Zr, Y, Hf and Gd)†

Georgiy Akopov,

^a Inwhan Roh,^a Zachary C. Sobell,^a Michael T. Yeung

^b and Richard B. Kaner

*^acd

Author affiliations

* Corresponding authors

^a Department of Chemistry and Biochemistry, University of California, Los Angeles (UCLA), Los Angeles, CA 90095, USA
E-mail: kaner@chem.ucla.edu

^b Department of Chemistry, Northwestern University, Evanston, IL 60208, USA

^c Department of Materials Science and Engineering, University of California, Los Angeles (UCLA), Los Angeles, CA 90095, USA

^d California NanoSystems Institute (CNSI), University of California, Los Angeles (UCLA), Los Angeles, CA 90095, USA

Abstract

Samples of metal borides with a nominal composition of ((M₁)_(1−x−z)(M₂)_(x)(M₃)_(z)) : 20B (M₁, M₂ and M₃ = Zr, Y, Hf and Gd) were prepared by arc-melting and studied for phase composition (using powder X-ray diffraction (PXRD) and energy dispersive X-ray spectroscopy (EDS)) and mechanical properties (Vickers hardness). Ternary metal dodecaboride phases were successfully synthesized for the majority of compositions, including stabilization of two high-pressure (6.5 GPa) phases (cubic-UB₁₂ structure), HfB₁₂ and GdB₁₂, in (Zr_1−x−zHf_xGd_z) : 20B and (Y_1−x−zHf_xGd_z) : 20B nominal alloy compositions. Unit cell refinement for the samples showed solid solution formation in most cases. Vickers hardness measurements indicated that most samples possess enhanced hardness in comparison to their parent phases, with the alloy (Zr_0.50Y_0.25Gd_0.25) : 20B having a hardness of 46.9 ± 2.4 GPa compared to 41.3 ± 1.1 and 41.6 ± 1.3 GPa for alloy compositions of 1.0 Zr : 20B and 1.0 Y : 20B, respectively, at 0.49 N of applied load. Using the data from this manuscript as well as previous work, pseudo-ternary phase diagrams (at a constant boron content) have been constructed.

This article is part of the themed collection: Celebrating our 2018 prize and award winners

Supplementary files

Article information

DOI: https://doi.org/10.1039/C8DT00563J
Article type: Paper
Submitted: 10 2 2018
Accepted: 06 4 2018
First published: 06 4 2018

Download Citation

Dalton Trans., 2018,47, 6683-6691

Author version available

Download author version (PDF)

Permissions

Request permissions

Investigation of ternary metal dodecaborides (M₁M₂M₃)B₁₂ (M₁, M₂ and M₃ = Zr, Y, Hf and Gd)

G. Akopov, I. Roh, Z. C. Sobell, M. T. Yeung and R. B. Kaner, Dalton Trans., 2018, 47, 6683 DOI: 10.1039/C8DT00563J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Dalton Transactions