Issue 13, 2014

Conformal phase masks made of polyurethane acrylate with optimized elastic modulus for 3D nanopatterning

Abstract

The pattern resolution of soft lithographic techniques is critically determined by the elastic modulus of the soft mold that can support fine and high-aspect-ratio features with conformal adhesion to target substrates. We present a strategy to fine-tune the elastic modulus of conformal molds made of polyurethane acrylate by optimizing the chemical structures and the composition of prepolymer and modulator. Trimethylolpropane ethoxylated (15) triacrylate plays a key role as a delicate modulator for increasing the elastic modulus of soft aliphatic urethane diacrylate oligomer with its low cross-linking density. The optimized molds have sufficiently high elastic modulus (>23 MPa) for defect-free replication of dense, high-aspect-ratio (>2) nanopillars and nanotrench structures while still preserving their conformality. The conformal mold with good mechanical and optical properties can serve as a semi-permanently usable optical phase mask with a wide range of phase modulations for generating three-dimensional (3D) nanostructures with high precision.

Graphical abstract: Conformal phase masks made of polyurethane acrylate with optimized elastic modulus for 3D nanopatterning

Supplementary files

Article information

Article type
Paper
Submitted
07 11 2013
Accepted
15 1 2014
First published
16 1 2014

J. Mater. Chem. C, 2014,2, 2316-2322

Conformal phase masks made of polyurethane acrylate with optimized elastic modulus for 3D nanopatterning

J. Park, D. Tahk, C. Ahn, S. G. Im, S. Choi, K. Suh and S. Jeon, J. Mater. Chem. C, 2014, 2, 2316 DOI: 10.1039/C3TC32194K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements