Issue 48, 2014

Site-specific catalytic activity in exfoliated MoS2 single-layer polytypes for hydrogen evolution: basal plane and edges

Abstract

We performed ab initio calculations on the basic set of MoS2 single-layer materials, namely the 1H, 1T and 1T′ polytypes, to lay a theoretical framework on the emerging breakthrough-discoveries of high activity towards the hydrogen evolution reaction (HER) in exfoliated MoS2 and related materials. Our calculations show that for exfoliated MoS2, 1T′ is the most HER active polytype, with active sites both on the basal plane and at the edges of the layered grains. In comparison, the basal planes of the 1H and 1T polytypes are HER inactive and their edge-sites are not as active as those of the 1T′ polytype. We also found that 1T-MoS2 is unstable and easily transforms into 1T′-MoS2, and the 1T′ phase is metastable with a considerable barrier >0.7 eV to bar its transformation into the most stable 1H phase. Further, unlike the case of exfoliated WS2, the HER activity of exfoliated MoS2 is not so critically affected by the lattice strain. In addition, in contrast to the 1T′-WS2, the 1T′-MoS2 is not metallic but has a very small bandgap of 0.1–0.2 eV. Hence, 1T′-MoS2 should have a high enough conductivity and other suitable properties for it to function as an electrochemical HER catalyst.

Graphical abstract: Site-specific catalytic activity in exfoliated MoS2 single-layer polytypes for hydrogen evolution: basal plane and edges

Article information

Article type
Paper
Submitted
03 Okt. 2014
Accepted
29 Okt. 2014
First published
30 Okt. 2014

J. Mater. Chem. A, 2014,2, 20545-20551

Site-specific catalytic activity in exfoliated MoS2 single-layer polytypes for hydrogen evolution: basal plane and edges

X. Fan, Y. Yang, P. Xiao and W. Lau, J. Mater. Chem. A, 2014, 2, 20545 DOI: 10.1039/C4TA05257A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements