Sarah-Jane
Richards‡
a,
Tessa
Keenan‡
d,
Jean-Baptiste
Vendeville
e,
David E.
Wheatley
e,
Harriet
Chidwick
d,
Darshita
Budhadev
d,
Claire E.
Council
e,
Claire S.
Webster
f,
Helene
Ledru
f,
Alexander N.
Baker
a,
Marc
Walker
c,
M. Carmen
Galan
f,
Bruno
Linclau
*e,
Martin A.
Fascione
*d and
Matthew I.
Gibson
*ab
aDepartment of Chemistry, University of Warwick, CV4 7AL, UK. E-mail: m.i.gibson@warwick.ac.uk
bWarwick Medical School, University of Warwick, CV4 7AL, UK
cDepartment of Physics, University of Warwick, CV4 7AL, UK
dDepartment of Chemistry, University of York, Heslington, York, YO10 5DD, UK. E-mail: martin.fascione@york.ac.uk
eSchool of Chemistry, University of Southampton, Highfield, Southampton SO171BJ, UK. E-mail: bruno.linclau@soton.ac.uk
fSchool of Chemistry, University of Bristol, Cantock's Close, Bristol, BS8 1TS, UK
First published on 16th November 2020
Galectins are potential biomarkers and therapeutic targets. However, galectins display broad affinity towards β-galactosides meaning glycan-based (nano)biosensors lack the required selectivity and affinity. Using a polymer-stabilized nanoparticle biosensing platform, we herein demonstrate that the specificity of immobilised lacto-N-biose towards galectins can be ‘turned on/off’ by using site-specific glycan fluorination and in some cases reversal of specificity can be achieved. The panel of fluoro-glycans were obtained by a chemoenzymatic approach, exploiting BiGalK and BiGalHexNAcP enzymes from Bifidobacterium infantis which are shown to tolerate fluorinated glycans, introducing structural diversity which would be very laborious by chemical methods alone. These results demonstrate that integrating non-natural, fluorinated glycans into nanomaterials can encode unprecedented selectivity with potential applications in biosensing.
The installation of glycans onto polymer-coated gold nanoparticles is a powerful technology to probe lectin binding.12,13 The polymer coating provides steric stabilization to prevent aggregation in complex media, and the incorporation of multiple copies of a glycan at the polymer chain ends, increases affinity due to the cluster glycoside effect.14 Gold nanoparticles have unique optical properties,15,16 which enables signal generation through aggregation13,17–19 in lateral flow devices,20,21 and also in surface enhanced Raman spectroscopy.22 However, most studies with multivalent glycans involve mono/di-saccharides which have shown limited selectivity so far.23 There is therefore a knowledge and technological gap, to develop synthetically-accessible multivalent probes, which are also endowed with selectivity.24
Fluorination of glycans influences their physicochemical properties and hence modulates their biological function.25–28 While fluorine substitution has little effect on glycan conformation,29,30 it can influence hydrogen bonding properties of adjacent hydroxyl groups,31,32 and fluorine itself is a weak hydrogen bond acceptor but not a hydrogen bond donor.33,34 Furthermore, fluorine atoms can form attractive multipolar interactions with proteins,35,36 and these have been observed with fluorinated carbohydrate derivatives,37 including galectin binders.38 Fluorinated sialyl oligosaccharides displayed significantly higher binding affinities for the Toxoplasma gondii lectin, TgMIC1 in comparison to their non-fluorinated counterparts.39 Similarly, fluorinated MUC-1 antigens displayed enhanced immunogenicity and differential binding affinity to mouse antisera, making them useful tools for probing humoral immune responses.40 Fluorinated glycans have also proven effective for probing carbohydrate–lectin structure–activity relationships. For example, Glcα1–3ManαMe analogues fluorinated around the Glc moiety revealed that the 2- and 3-OH group of Glc were important for calreticulin binding, but not the 6-OH.41 Similarly, the 6-OH group of the α-1,6-branched mannose in the Man3GlcNAc2 glycan, was shown to be important for Concanavalin A binding.42
A powerful route to diversify unnatural glycans is to incorporate an enzymatic step. By using promiscuous enzymes for glycosidic bond formation,27 which are capable of accepting chemically accessible fluorinated glycans, building blocks can be combined, producing anomerically pure compounds, facilitating purification.
Herein we report a chemoenzymatic route to selectively fluorinated lacto-N-biose (Gal-β1–3-GlcNAc) glycans, including fluorination at both sugar residues, and their integration into a multivalent glyconanoparticle platform. We demonstrate that site-selective fluorination enables modulation of the affinity and introduces high selectivity towards Galectins 3 and 7 which is not possible using native glycans. This approach demonstrates the potential for the translation of glyconanomaterials to applications in therapy and biosensing.
Fig. 1 (A) Chemical syntheses of fluorinated acceptors. (B) Fluorinated lacto-N-biose analogues prepared using a chemoenzymatic strategy with BiGalK and BiGalHexNAcP. TFA = trifluoroacetyl. |
PHEA (poly(hydroxylethyl acrylamide)) coated gold nanoparticles were selected for the screening, as these are an established platform for glycan binding analysis.5,39 This tool requires small (μg) quantities of glycans and hence is ideal for screening compared to calorimetry or NMR-based approaches which need more material, which is not always available. RAFT (reversible addition–fragmentation chain transfer) polymerization was used to obtain telechelic PHEA ligands bearing a pentafluorophenyl (PFP) group at the α-terminus (Fig. 2A).44,48 The PFP was displaced by dibenzocyclooctyne-amine, introducing a handle (validated by 19F NMR) to capture the glycosyl azide, by strain promoted azide/alkyne click (SPAAC). By using RAFT, an ω-terminal thiol was also produced enabling assembly of the glycoligands onto 55 nm gold nanoparticles with excess polymer removed by centrifugation/resuspension cycles. The nanoparticle size and polymer chain length (DP25) used were guided by previous work, to give a balance between colloidal stability and aggregation responses.39 UV-visible spectroscopy showed the characteristic SPR band (533 nm) and no aggregation (at 700 nm) after polymer coating (Fig. 2B). Dynamic light scattering showed a small increase in hydrodynamic diameter consistent with polymer coating (Fig. 2C). X-ray photoelectron spectroscopy (XPS, in ESI†) confirmed the presence of the polymers and the fluorine from the glycans.
With this panel of fluoro-glycan nanoparticles (GlycoAuNPs) in hand, their lectin binding affinity/selectively trends could be evaluated, initially using soybean agglutinin (SBA) which preferentially binds β-D-galactosides.13,49 Binding was assessed by exploiting the optical properties of the GlycoAuNPs, whereby SBA binding leads to aggregation of the nanoparticles (Fig. 3A). This results in a red-blue colour shift which can be assessed by UV-visible spectroscopy (Fig. 3B).17,18,50 As expected, lacto-N-biose (15) showed weak affinity towards SBA (KD, apparent > 10 μM; KD values for multivalent systems are very challenging to determine). Fluorine addition to the GlcNAc unit improved the binding >12-fold, where Gal-β(1,3)-6FGlcNTFA (20, dark blue line), Gal-β(1,3)-6,6diFGlcNAc (22, pink line) and Gal-β(1,3)-6,6diFGlcNTFA (23, green line) all show KD,apparent values in the range of 0.84–0.89 μM. Furthermore Gal-β(1,3)-6FGlcNAc (18, dark purple line) does not have sufficient fluorine incorporation to see this increase in binding. Fluorination in any position around the galactose ring was not tolerated, resulting in decreased binding affinity in the cases of 6FGal-β(1,3)-6FGlcNTFA (21) compared to Gal-β(1,3)-6FGlcNTFA (20).
Guided by these experiments with SBA, Galectin-3 binding was profiled (Fig. 3C). Galectin-3 has only a single binding site, but is in equilibrium with a pentameric form, and hence can cross-link multivalent glycomaterials.51 Lacto-N-biose (15) particles bound Galectin-3, agreeing with previous observations from Hsieh et al.43 However, a number of fluorinated lacto-N-biose derivatives bound with a greater affinity to Galectin-3 than native (15), with 3FGal-β(1,3)-GlcNAc (16), Gal-β(1,3)-6,6diFGlcNTFA (23), Gal-β(1,3)-6FGlcNTFA (20) and Gal-β1(1,3)-6,6diFGlcNAc (22) all showing enhanced binding. In contrast, any glycan with a 6FGal derivative, such as 6FGal-β(1,3)-GlcNAc (17), 6FGal-β(1,3)-6FGlcNAc (19) and 6FGal-β(1,3)-6FGlcNTFA (21) completely ‘switched off’ the binding to Galectin-3. Kinetic analysis of aggregation agreed with dose–response (Fig. 3D) data, with 3FGal-β(1,3)-GlcNAc (16) showing the fastest rate. This was confirmed by dynamic light scattering (Fig. 3E) showing that ‘non-binder’ 6FGal-β(1,3)-6FGlcNTFA (21) does not lead to aggregation. This provides strong evidence that subtle site-specific fluorination is a powerful tool to introduce affinity and selectivity into glycans against biomedically relevant lectins, when conjugated to nanoparticles.
To further validate the aggregation-based assays, biolayer interferometry (BLI) was employed.12 Galectin-3 was biotinylated, then immobilized onto streptavidin-functional BLI sensors, and the GlycoAuNPs applied (Fig. 4). Lacto-N-biose (15, Fig. 4A) showed little binding due to the concentrations used (to enable enhancements to be observed without saturation). In agreement with the aggregation-based assays, significant binding was observed using 3FGal-β(1,3)-GlcNAc (16, Fig. 4B), and there was some limited binding observed with Gal-β(1,3)-6FGlcNTFA (20, Fig. 4C). Also in line with the aggregation data, no binding was seen for 6FGalβ(1,3)-6FGlcNTFA (21, Fig. 4D). Indeed, consideration of the crystal structure (PDB entry 4XBN43) of Galectin-3 with lacto-N-biose reveals an interaction of the 6-OH of galactose with residues Asn174A/Glu184A, supporting our observation that 6-OH replacement with fluorine is detrimental for binding. The 3-OH group is not involved in H-bonding interactions and hence fluorination does not diminish binding, and instead appears to increase the overall affinity. Overall, these data conclusively show that site-specific fluorination enables precise modulation of binding affinity and could be used to generate nanoparticle biosensors for rapid detection of this important biomarker.
Fig. 4 Biolayer interferometry analysis of binding of AuNPs to Galectin-3. (A) Lacto-N-biose (15); (B) 3FGal-β(1,3)-GlcNAc (16); (C) Gal-β(1,3)-6FGlcNTFA (20); (D) 6FGal-β(1,3)-6FGlcNTFA (21). |
Encouraged by the Galectin-3 binding data, the utility of these unique fluoro-glycan nanoparticles to discriminate between individual galectins was explored, which is often not possible with natural glycans nor with monosaccharide-based glycomaterials. Galectin-7 was chosen as it has previously been reported to have lower affinity towards lacto-N-biose (270 μM) than Galectin-3 (93 μM)43 and hence offers a robust challenge to explore how fluorination can be used to tune specificity/affinity. Binding of Galectin-7 to the library of particles by the aggregation assay (as described above) was conducted, and Fig. 5 shows the relative affinities as KD,apparent. Lacto-N-biose particles showed preference for Galectin 3 as anticipated, displaying limited binding to Galectin-7 in the concentration range tested. Introduction of fluorine atoms resulted in a variation of the observed KD's, but in particular 6FGalβ(1,3)-6FGlcNTFA (21) showed switching of affinity compared to non-fluorinated ligands: this derivative showed no affinity to Galectin-3, but the fluorination results in ‘switching on’ of affinity towards Galectin-7. The extent of aggregation at plateau for 21 was lower than for 15, but clear binding was seen. It is important to highlight that these assays cannot identify if glycans engage the protein in the same manner, or at different (non-canonical) binding sites. This affinity switch shows that the site-specific incorporation of fluorine atoms can overcome the low selectivity of glycans towards their lectin partners and in some cases completely turn off interactions. Additional glycan modifications to a core lactosyl unit in a glycan array have also been reported to modulate galectin binding patterns, which is complementary to the approach taken here.52 Such selectivity is essential in the development of glyconano tools for therapy and diagnostics. Furthermore, this chemoenzymatic synthetic approach to glycan libraries may facilitate screening of binding epitopes by methods such as (STD) NMR53–55 which require more material and have lower throughput.
Footnotes |
† Electronic supplementary information (ESI) available: This includes full synthetic procedures, characterization of glycans/nanoparticles and binding curves. See DOI: 10.1039/d0sc05360k |
‡ These authors contributed equally. |
This journal is © The Royal Society of Chemistry 2021 |