Issue 2, 2015

Nanoporous silver microstructure for single particle surface-enhanced Raman scattering spectroscopy

Abstract

The potential of a nanoporous Ag microstructure (np-AgMs) for use as a single particle for surface-enhanced Raman scattering spectroscopy (SERS), with the added advantages of being easy to manipulate and reusable, was successfully demonstrated. The np-AgMs with interconnected pore and controllable pore size were fabricated from symmetric hexapod AgCl via a galvanic replacement reaction in NaCl solution with zinc (Zn) as the sacrificed metal. The clean surface of np-AgMs enables rapid surface functionalization with easy handling and sample preparation as no particle aggregation occurs. The SERS acquisition spots on the np-AgMs can be visually selected using a normal Raman microscope. SERS spectra of p-aminothiophenol (PATP) with a concentration range of 10−8–10−3 M can be achieved. The position-dependent enhancement of np-AgMs was expendably evaluated. The signal-position correlation was confirmed by electric filed enhancement obtained from Finite-difference time-domain (FDTD) calculation. In addition, the highly stable substrate showed insignificant loss of the enhanced Raman signal after several cycles of chemical re-generation. Finally, the potential application of np-AgMs in label-free detection of biomolecules including hemoprotein, protein without chromophore and DNA strains at low concentration of 500 μg mL−1 was demonstrated.

Graphical abstract: Nanoporous silver microstructure for single particle surface-enhanced Raman scattering spectroscopy

Supplementary files

Article information

Article type
Paper
Submitted
07 Okt. 2014
Accepted
18 Nov. 2014
First published
19 Nov. 2014

RSC Adv., 2015,5, 1391-1397

Nanoporous silver microstructure for single particle surface-enhanced Raman scattering spectroscopy

K. Wongravee, H. Gatemala, C. Thammacharoen, S. Ekgasit, S. Vantasin, I. Tanabe and Y. Ozaki, RSC Adv., 2015, 5, 1391 DOI: 10.1039/C4RA11890A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements