Issue 1, 2017

Carbon onion–sulfur hybrid cathodes for lithium–sulfur batteries

Abstract

In this study, we explore carbon onions (diameter below 10 nm), for the first time, as a substrate material for lithium sulfur cathodes. We introduce several scalable synthesis routes to fabricate carbon onion–sulfur hybrids by adopting in situ and melt diffusion strategies with sulfur fractions up to 68 mass%. The conducting skeleton of agglomerated carbon onions proved to be responsible for keeping active sulfur always in close vicinity to the conducting matrix. Therefore, the hybrids are found to be efficient cathodes for Li–S batteries, yielding 97–98% Coulombic efficiency over 150 cycles with a slow fading of the specific capacity (ca. 660 mA h g−1 after 150 cycles) in long term cycle test and rate capability experiments.

Graphical abstract: Carbon onion–sulfur hybrid cathodes for lithium–sulfur batteries

Supplementary files

Article information

Article type
Paper
Submitted
02 Nov. 2016
Accepted
03 Janv. 2017
First published
03 Janv. 2017
This article is Open Access
Creative Commons BY license

Sustainable Energy Fuels, 2017,1, 84-94

Carbon onion–sulfur hybrid cathodes for lithium–sulfur batteries

S. Choudhury, M. Zeiger, P. Massuti-Ballester, S. Fleischmann, P. Formanek, L. Borchardt and V. Presser, Sustainable Energy Fuels, 2017, 1, 84 DOI: 10.1039/C6SE00034G

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements