Which is a better fluorescent sensor: aggregation-induced emission-based nanofibers or thin-coating films?

Yexin Ding; Weili Li; Fangming Wang; Hongkun Li; Shengyuan Yang; Lijun Wang; Zhiming Wang; Mike Tebyetekerwa; Ben Zhong Tang

doi:10.1039/D0MA00409J

Which is a better fluorescent sensor: aggregation-induced emission-based nanofibers or thin-coating films?†

Yexin Ding,^a Weili Li,

*^a Fangming Wang,^a Hongkun Li,

^b Shengyuan Yang,

^c Lijun Wang,^a Zhiming Wang,

^d Mike Tebyetekerwa

*^e and Ben Zhong Tang

*^df

Author affiliations

* Corresponding authors

^a School of Material Science and Engineering & National Demonstration Center for Experimental Materials Science and Engineering Education, Jiangsu University of Science and Technology, Zhenjiang, China
E-mail: liweili@just.edu.cn

^b State and Local Joint Engineering Laboratory for Novel Functional Polymeric Materials, Laboratory of Advanced Optoelectronic Materials, College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou 215123, China

^c State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, Shanghai “Belt & Road” International Joint Laboratory for Advanced Fiber and Low-dimension Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, P. R. China

^d Guangdong Innovative Research Team, State Key Laboratory of Luminescent Materials and Devices, South China University of Technology, Guangzhou 510640, P. R. China

^e Research School of Electrical, Energy and Materials Engineering, College of Engineering and Computer Science, The Australian National University, Canberra, ACT 2601, Australia
E-mail: mike.tebyetekerwa@anu.edu.au

^f Department of Chemistry, Hong Kong Branch of Chinese National Engineering Research Center for Tissue Restoration and Reconstruction, The Hong Kong University of Science & Technology, Clear Water Bay, Kowloon, Hong Kong, P. R. China
E-mail: tangbenz@ust.hk

Abstract

In this work, aggregation-induced emission (AIE)-based fluorescent nanofibers and thin-film coatings are fabricated using electrospinning and spin coating techniques, respectively. The two material domains are utilized as visual fluorescent sensors whose mechanism of performance is governed by the intramolecular rotation phenomenon of the AIE molecular rotors. The samples’ response to humidity, temperature and organics is compared. Final results revealed that there is no all-ideal morphology. Each material works best as a visual fluorescent sensor in specific environments.

This article is part of the themed collections: Fluorescent and Luminescent Materials and Materials Advances HOT Article Collection

Supplementary files

Article information

DOI: https://doi.org/10.1039/D0MA00409J
Article type: Communication
Submitted: 11 Jūn. 2020
Accepted: 03 Jūl. 2020
First published: 06 Jūl. 2020
This article is Open Access

Download Citation

Mater. Adv., 2020,1, 574-578

Permissions

Request permissions

Which is a better fluorescent sensor: aggregation-induced emission-based nanofibers or thin-coating films?

Y. Ding, W. Li, F. Wang, H. Li, S. Yang, L. Wang, Z. Wang, M. Tebyetekerwa and B. Z. Tang, Mater. Adv., 2020, 1, 574 DOI: 10.1039/D0MA00409J

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Materials Advances

Which is a better fluorescent sensor: aggregation-induced emission-based nanofibers or thin-coating films?†

Abstract

Supplementary files

Article information

Download Citation

Permissions

Which is a better fluorescent sensor: aggregation-induced emission-based nanofibers or thin-coating films?

Social activity

Search articles by author

Spotlight

Advertisements