Two-photon polymerization lithography enabling the fabrication of PEDOT:PSS 3D structures for bioelectronic applications

Amedeo Ruggiero; Valeria Criscuolo; Sara Grasselli; Ugo Bruno; Chiara Ausilio; Claudia Latte Bovio; Ottavia Bettucci; Francesca Santoro

doi:10.1039/D2CC03152C

You do not have JavaScript enabled. Please enable JavaScript to access the full features of the site or access our non-JavaScript page.

Two-photon polymerization lithography enabling the fabrication of PEDOT:PSS 3D structures for bioelectronic applications†

Amedeo Ruggiero,

‡^abc Valeria Criscuolo,

*^a Sara Grasselli,^a Ugo Bruno,^ad Chiara Ausilio,^a Claudia Latte Bovio,^ad Ottavia Bettucci^a and Francesca Santoro

*^abc

Author affiliations

* Corresponding authors

^a Tissue Electronics, Istituto Italiano di Tecnologia, 80125 Naples, Italy
E-mail: valeria.criscuolo@iit.it

^b Faculty of Electrical Engineering and IT, RWTH Aachen, Germany

^c Institute for Biological Information Processing-Bioelectronics, Forschungszentrum Juelich, Germany
E-mail: f.santoro@fz-juelich.de

^d Dipartimento di Chimica, Materiali e Produzione Industriale, Università di Napoli Federico II, 80125 Naples, Italy

Abstract

Conductive 3D platforms have gained increasing attention in bioelectronics thanks to the improvement in the cell-chip coupling. PEDOT:PSS is nowadays widely employed in bioelectronic applications thanks to its electrical and mechanical properties. In this work, an innovative fabrication method for the realization of PEDOT:PSS-based conductive micropillars and 3D cage-like structures is presented, combining two-photon lithography and electrodeposition techniques.

This article is part of the themed collection: 2022 Pioneering Investigators

Download options Please wait...

Supplementary files

Supplementary information PDF (5643K)

Article information

DOI: https://doi.org/10.1039/D2CC03152C
Article type: Communication
Submitted: 06 Jūn. 2022
Accepted: 02 Aug. 2022
First published: 03 Aug. 2022
This article is Open Access

Download Citation

Chem. Commun., 2022,58, 9790-9793

Permissions

Request permissions

Two-photon polymerization lithography enabling the fabrication of PEDOT:PSS 3D structures for bioelectronic applications

A. Ruggiero, V. Criscuolo, S. Grasselli, U. Bruno, C. Ausilio, C. L. Bovio, O. Bettucci and F. Santoro, Chem. Commun., 2022, 58, 9790 DOI: 10.1039/D2CC03152C

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Social activity

Fetching data from CrossRef.
This may take some time to load.

Chemical Communications

Two-photon polymerization lithography enabling the fabrication of PEDOT:PSS 3D structures for bioelectronic applications†

Abstract

Supplementary files

Article information

Download Citation

Permissions

Two-photon polymerization lithography enabling the fabrication of PEDOT:PSS 3D structures for bioelectronic applications

Social activity

Search articles by author

Spotlight

Advertisements