Issue 33, 2024

ZnO-templated hollow amorphous carbon: oxygen adsorption and doping synergy for enhanced ORR catalysis

Abstract

In pursuit of highly active zinc–air battery (ZAB) catalysts, nitrogen doping has proven key to enhancing carbon-based non-metallic catalysts’ performance in the oxygen reduction reaction (ORR). This study employed a novel method to synthesize variously sized ZnO materials coated with ZIF-8. Notably, smaller particle sizes correlated with reduced activation energy. ZnO-12, the smallest variant, fully carbonized at 800 °C, resulting in zinc ion evaporation and the formation of an amorphous carbon nano-hollow structure, ZIF8/ZnO-12. This material showcased remarkable ORR properties, with an onset potential of 0.9 V (vs. RHE) and a Tafel slope of 71.4 mV dec−1, surpassing the benchmark Pt/C catalyst and exhibiting excellent stability. Moreover, in ZAB tests, ZIF8/ZnO-12 achieved a specific capacity of 816 mA h g−1, outperforming Pt/C. DFT calculations indicate that under alkaline conditions, nitrogen-doped carbon materials containing adsorbed oxygen and doped oxygen exhibit lower catalytic activation energy for the ORR, which is beneficial for accelerating the ORR. This research provides valuable insights into designing more efficient carbon-based non-metallic catalysts for ZABs.

Graphical abstract: ZnO-templated hollow amorphous carbon: oxygen adsorption and doping synergy for enhanced ORR catalysis

Supplementary files

Article information

Article type
Paper
Submitted
11 Jūn. 2024
Accepted
31 Jūl. 2024
First published
06 Aug. 2024

Dalton Trans., 2024,53, 13837-13846

ZnO-templated hollow amorphous carbon: oxygen adsorption and doping synergy for enhanced ORR catalysis

G. Wang, Y. Yin, C. Lin, S. Min and J. Ma, Dalton Trans., 2024, 53, 13837 DOI: 10.1039/D4DT01696C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements