An Improved method to generate secondary nanoplastics and oligomers: Application in ecotoxicology

Abstract

Recent studies have highlighted the ecotoxicological effects of conventional primary nanoplastics (NPLs), however, the impacts of secondary NPLs and oligomers (Olig), especially those derived from biodegradable plastics, formed through fragmentation and natural degradation processes (e.g., photooxidation) remain underexplored. This gap is partly due to challenges in producing sufficient quantities for toxicity testing. An improved method to generate non-photooxidized (NP) and photooxidized (P) secondary NPLs and Olig from polybutylene adipate co-terephthalate (PBAT), a biodegradable plastic commonly used in agriculture mulching, that involves the mechanical breakdown of PBAT-microbeads with or without prior photooxidation is presented. PBAT was irradiated at ~ 9.34 kW m−2 (approximately 120 times the solar irradiance) during 96 h, irradiation that corresponds to ~ 16 months of average sunlight in the Iberian Peninsula (7.7 kWh m−2 day−1). The toxicological effects on Chlamydomonas reinhardtii, a model green microalga of primary producers in freshwater ecosystems was also assessed. The protocol yielded 0.199 mg of secondary NP-PBAT-NPLs and 10.275 mg of NP-PBAT-Olig per gram of PBAT-microbeads. PBAT-NPLs presented irregular spherical morphologies and hydrodynamic sizes ranging from 56.71 to 69.86 nm. HPLC and MALDI-TOF analysis identified linear and cyclic Olig, ranging from dimers to 19 repeated-units Olig. PBAT-NPLs and PBAT-Olig exhibited negative surface charges, suggesting colloidal stability in water. While PBAT-NPLs and PBAT-Olig did not inhibit algal growth in the short-term, they induced reactive oxygen species overproduction at the environmentally relevant concentrations of 0.01 mg/L, and caused membrane depolarization, impaired photosynthesis and lipid peroxidation at 10 mg/L. Non-photooxidized PBAT-NPLs exhibited the highest toxicity, followed by photooxidized PBAT-NPLs and both non-photooxidized and photooxidized PBAT-Olig. This study provides an efficient method for producing reference secondary NPLs and Olig and underscores the potential risks of PBAT towards primary producers in freshwater ecosystems.

Supplementary files

Article information

Article type
Paper
Submitted
19 Sept. 2024
Accepted
18 Dec. 2024
First published
23 Dec. 2024

Environ. Sci.: Nano, 2025, Accepted Manuscript

An Improved method to generate secondary nanoplastics and oligomers: Application in ecotoxicology

S. Gomez-Kong, M. Tamayo Belda, G. Pulido-Reyes, C. Edo, I. Verdú, F. Leganes, R. Rosal, M. González-Pleiter and F. Fernandez-Piñas, Environ. Sci.: Nano, 2025, Accepted Manuscript , DOI: 10.1039/D4EN00866A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements