Making an inverted Keggin ion lacunary

Abstract

The century-old inverted Keggin ion has been revisited in an effort to unleash its potential in the structural engineering and functional development of polyoxomolybdates (POMos). Over the past hundred years, attempts to program the metal–oxo scaffold of inverted Keggins have been conducted continually but without any success. In this work, a structurally inert, inverted Keggin-type POMo could finally be altered by means of a binary heterogroup-templated approach, resulting in the successful isolation of two lacunary species. The local structure and charge distribution of these species are adjustable, and hence they serve as available building blocks for the subsequent controlled assembly of a Ce^III-incorporated derivative. From the plenary to the lacunary, the enclosed structure of the inverted Keggin has been opened up significantly, resulting in less steric hindrance, along with a transition from an electron neutral species to a negatively charged species. Owing to these beneficial properties, the emerging defect-containing polyanions demonstrated outstanding Lewis acid–base catalytic activity in the high efficiency production of pyrazoles.

---

Introduction

The study of polyoxometalates (POMs) dates back nearly two centuries to when Berzelius first reported the ammonium salt of [PMo₁₂O₄₀]³⁻ in 1826.¹ This dodecanuclear archetype of hetero POMs was then named after J. F. Keggin for his great contribution to its structural determination in 1933.² To this day, the so-called Keggin ion, [(XO₄)M₁₂O₃₆]ⁿ⁻ (X = heteroatom; M = addenda atom), remains at the forefront of research into POM chemistry. The role of “X” can be played by nearly all of the elements (noble gases excluded) across the periodic table. For “M”, besides the conventional metal ions, Mo^VI and W^VI, the oxides of several p-block metals (e.g., Al^III, Sn^IV, Sb^V)^3–6 and d-block metals (e.g., Ti^IV, Fe^III, Pd^II)^7–10 are also able to adopt the Keggin scaffold, as demonstrated by very recent studies. Owing to their diverse library of compositions, Keggin-type POMs with a remarkable range of physicochemical properties have gained wide acceptance in many important fields.¹¹ By stark contrast, the structurally related inverted Keggin ions of the general formula [(RXO₃)₄M₁₂O₃₄]ⁿ⁻ (X = As^V or P^V; M = Mo^VI; R = oxygen or organic groups) have seldom been in the spotlight, despite their discovery being communicated by H. Debray as early as 1874.¹² Over the past hundred years, despite the sustained efforts from generations of chemists worldwide, the progress in the fundamental and applied research of inverted Keggin-type POMs has not matched that of their Keggin counterparts.^13–27

The principal advantage of the classical Keggin ions, in particular the polyoxotungstates (POWs) with a [XW₁₂O₄₀]³⁻ archetype, lies in their structural editability. Driven mainly by pH fluctuations, a varying number of {WO₆} octahedra at specific locations can be selectively removed to yield mono-, di-, or tri-lacunary derivatives with versatile coordination modes (Scheme 1).²⁸ The exposed oxygens around the openings of these derivatives are able to bond entities such as transition metals, lanthanides, and organometallic fragments with catalytic, magnetic, or biomedical functions.^29–31 As a result, the birth of lacunary Keggin ions has provided an enriched reservoir of molecular building blocks for the design and engineering of POM-based materials.^32,33 The structures of inverted Keggin ions, in contrast, has been more difficult to change. In contrast to the Keggin ions, the four groups of the edge-sharing {M₃O₁₃} moieties in the inverted Keggin archetype are turned inside-out and are joined together via their corners, resulting in a tetrahedral conformation with an idealized T_d symmetry.¹³ Instead of being positioned at the center of the molecule, the heterogroups (e.g., organo-arsonates and -phosphonates) are attached peripherally to the four faces confined by the adjacent {M₃O₁₃} motifs.^{14–21,24–27} There is, in turn, a central cavity with a radius of ca. 2.9 Å. Relying on the protection from the increased number of heterogroups with hydrophobic aryl or alkyl pendent arms, the preparation of lacunary inverted Keggin species is rather challenging and has yet to be achieved.²⁸

Scheme 1 Structural representation of Keggin and inverted Keggin ions as well as their lacunary derivatives. Color code: {WO₆}, plum octahedra; {MoO₆}, dark blue octahedra; X, green; R, turquoise; O, red.

Of particular note is that, compared with lacunary POWs, the number of lacunary polyoxomolybdates (POMos) is rather limited.²⁸ Most POMos are self-assembled via a bottom-up approach, so that the structures of the in situ formed species are often poorly controlled and are hard to predict. Moreover, the isolation of lacunary POMos is also tough, as a series of complex dynamic equilibria in the mixture of Mo–oxo clusters that appear in solution is usually involved.³⁴ In an effort to maintain the metastable frameworks of lacunary POMos, several strategies have been tried, such as the surface passivation by interesting organic ligands.^35–37 However, the synthesis of lacunary POMos is achieved at the expense of performance, as they almost lose the ability to combine with other electrophiles as most of the active coordination sites have been occupied. Therefore, maximizing the coordination ability of lacunary POMos to make them useful precursors represents a key issue of future research in POM chemistry.

To tap the potential of the inverted Keggin ion, the structural synthesis of its lacunary derivatives has been carried out in the current work. By virtue of a binary heterogroup-templated assembly, the structural evolution of di-vacant POMos bearing the inverted Keggin topology has been achieved in a controlled manner. The resulting open framework and tunable charge distribution of the polyanions meet the requirements of a useful synthetic precursor and allow coordination with Ce^III ions to extend the structural diversity further. Apart from the structural interest of the as-made compounds, their significantly enhanced Lewis acid–base catalytic activity for the preparation of pyrazoles has been evaluated and analyzed in detail.

Results and discussion

Based on the findings from reviewing previous works, almost all of the known inverted Keggin POMos were built with organo-arsonates/phosphonates as the heterogroups, where the sterically hindered organic parts prohibit the formation of Keggin structures.^{14–21,24–27} Moreover, a strong acidic environment (pH ≤ 1) has been reported to be essential for their assemblies. In consideration of the above, ligands of the type R–As/PO₃H₂ (R = C₆H₅, C₆H₄-4-NH₂, C₆H₄-4-COOH) were reacted with (NH₄)₆Mo₇O₂₄ in one-pot reactions. Upon increasing the pH stepwise from 1.0 to 6.0, none of the desired lacunary inverted Keggin species were obtained, indicating that the commonly used pH-dependent strategy might not work here. In this context, a binary heterogroup-templated approach has been proposed, as demonstrated in our previous research.³⁸ Specifically, a combination of tetrahedral {R–As/PO₃} and trigonal pyramidal {SeO₃} species was afforded simultaneously. The differences in their structural and electronic configurations were expected to steer the assembly process of the inverted Keggin ions towards a low symmetry route.

In an acidic aqueous solution containing (NH₄)₆Mo₇O₂₄ (pH = 0.9), the reaction of SeO₂ and p-H₂NC₆H₄AsO₃H₂ in a stoichiometric ratio of 2 : 1 resulted in a decanuclear Mo–oxo cluster, [(SeO₃)(p-H₃NC₆H₄AsO₃)₃Mo₁₀O₂₉]³⁻ (SeAs₃Mo₁₀); see the ESI† for synthetic details. As shown in Fig. 1a and b, the structure of SeAs₃Mo₁₀ can be described as a di-lacunary derivative of the saturated inverted Keggin [(p-H₃NC₆H₄AsO₃)₄Mo₁₂O₃₄] (As₄Mo₁₂), which was reported by Pope et al. in 1981.¹⁵ Interestingly, one of the four faces of the As₄Mo₁₂ tetrahedron is capped by a {SeO₃} function instead. Accordingly, the {(p-H₃NC₆H₄AsO₃)Mo₂O₅} moiety has been removed, resulting in a di-vacant species. With the proportion of SeO₂ increased from 2 : 1 to 3 : 1, the {p-H₃NC₆H₄AsO₃} cap close to the opening could be further replaced by a {SeO₃} heterogroup but without changing the Mo–oxo framework, yielding another di-vacant species, [(SeO₃)₂(p-H₃NC₆H₄AsO₃)₂Mo₁₀O₂₉]⁴⁻ (Se₂As₂Mo₁₀, Fig. 1c). To the best of our knowledge, SeAs₃Mo₁₀ and Se₂As₂Mo₁₀ represent the first examples of lacunary inverted Keggin ions.²⁸ It is noteworthy that no new terminal oxygen atoms are present in SeAs₃Mo₁₀ and Se₂As₂Mo₁₀ and that even some addenda atoms have been removed, which is quite different from the typical lacunary POWs. This might be attributed to the special atomic arrangement in the inverted Keggin ions, where two terminal metal–oxygen bonds are located on each addenda. Therefore, the formation of new terminal oxygen atoms in SeAs₃Mo₁₀ would require the removal of the {SeO₃} heterogroup, and the expected three terminal oxygen atoms would be arranged in a mer fashion (Fig. S1†). However, such behavior does violate the famous Lipscomb rule, which has been explained in terms of the strong trans influence of the terminal metal–oxygen bonds.³⁹ For a typical {MO₆} octahedron, the three terminal metal–oxygen bonds could arrange only in a fac but not in a mer fashion. Theoretically speaking, it is not possible to have new terminal oxygen atoms next to the lacuna in SeAs₃Mo₁₀ and Se₂As₂Mo₁₀. Meanwhile, the central heterogroup is responsible for connecting the four {M₃O₁₃} moieties, which plays a crucial role in the stabilization of the metal–oxo framework of the Keggin structure. However, in the absence of a heterogroup, the lacunary species of, for example, the Keggin-type species [H₂W₁₂O₄₀]⁹⁻ could not be obtained. With regards to the inverted Keggin structure, the four {M₃O₁₃} moieties are bridged by the four heterogroups from the outside. It is believed that if one of the heterogroups (e.g., {SeO₃}) is missing, there might be a risk that the whole cluster will be highly unstable and dissociate thereafter. Obviously, the previous definition of lacunary POMs is mostly based on the Keggin and Wells-Dawson archetypes. For these “non-classical” lacunary inverted Keggin ions reported here, the above-mentioned structural factors have to be considered.

Fig. 1 (a)–(c) Structural evolution from the plenary As₄Mo₁₂ species to the di-lacunary species, SeAs₃Mo₁₀ and Se₂As₂Mo₁₀. Color code: {MoO₆}, dark blue octahedra; As, green; Se, pink; C, gray; N, blue; O, red. (d) Structural symmetry of As₄Mo₁₂ and the as-made polyanions. (e) FT-IR spectra of As₄Mo₁₂, SeAs₃Mo₁₀ and Se₂As₂Mo₁₀. (f) and (g) EDX analysis of SeAs₃Mo₁₀ and Se₂As₂Mo₁₀.

It has been noted that the raw material, (NH₄)₆Mo₇O₂₄·4H₂O, could not be replaced by Na₂MoO₄·2H₂O in the synthesis, indicating that the counter cations (NH₄⁺) might play a key role in the crystallization of such polyanions. Meanwhile, only the {SeO₃} and {p-H₃NC₆H₄AsO₃} couple could cooperate to shape the defect polyanions. This might be attributed to (i) the pseudo-zwitterionic nature of the {p-H₃^⊕NC₆H₄AsO₃⁻} ligands, of which the positively charged quaternary ammonium and negatively charged arsonate group could withstand the pH fluctuation over the course of the crystallization;¹⁵ (ii) the similar bond lengths and tri-dentate coordination mode of {SeO₃} as compared to those of the {p-H₃NC₆H₄AsO₃} function;⁴⁰ and (iii) {p-H₃NC₆H₄AsO₃} cannot be replaced by {p-H₃NC₆H₄PO₃}, possibly because of the longer As–O bond distance (about 1.60 Å), as compared to that of the P–O bonds (about 1.50 Å), which meets the requirement for the connection of the {Mo₃O₁₃} moieties. Due to the loss of addenda and the partial substitution of the heterogroups, the symmetry of these molecules is reduced from T_d (As₄Mo₁₂) to C_s (SeAs₃Mo₁₀) and C_2v (Se₂As₂Mo₁₀). Taking the heteroatoms as vertices, the standard tetrahedron of {As₄} (As₄Mo₁₂) has been gradually distorted by the increased number of {SeO₃} groups in {SeAs₃} (SeAs₃Mo₁₀) and {Se₂As₂} (Se₂As₂Mo₁₀), as displayed in Fig. 1d. This might be explained by the lone pair of electrons on the {SeO₃} groups, which point at the center of the molecules. Possibly because of the twisted inner space and intense electrostatic repulsion, the surroundings are no longer suitable to support the presence of the addenda. Therefore, the {Mo₂O₅} unit departs from the plenary inverted Keggin scaffold, yielding the di-vacant species. Furthermore, the addition of even more SeO₂ into the reaction system did not change the structure of Se₂As₂Mo₁₀ further. In addition to the crystallographic characterization, the structural changes of the as-made polyanions were also validated via FT-IR spectroscopy. As depicted in Fig. 1e, the broad bands located at 670 and 583 cm⁻¹ (As₄Mo₁₂) are split into several peaks in the spectra of SeAs₃Mo₁₀ and Se₂As₂Mo₁₀, corresponding to the changed vibrations of the O–Mo–O and Mo=O groups in the defect-containing frameworks.⁴¹ Furthermore, the appearance of the {SeO₃} heterogroups was also unequivocally verified using EDX analysis (Fig. 1f and g). The valence states of the addenda and oxygen atoms were determined through XPS characterization (Fig. S2 and S3†) and BVS calculations⁴² (Table S1†), showcasing the presence of Mo^VI and indicating that none of the oxygen atoms are protonated.

To gather more information with regard to the solution behaviors of the as-made polyanions, UV-vis spectroscopy and electrospray-ionization mass spectrometry (ESI-MS) were carried out. Re-dissolution of the respective SeAs₃Mo₁₀ and Se₂As₂Mo₁₀ species in water displayed an absorption band located at ca. 254 nm, which can be ascribed to the pπ–dπ charge transfer of the O → Mo bands as well as the π–π* charge transfer of the aromatic groups (Fig. 2a and b).⁴³ Over a time span of 24 hours, the intensity of the band declined slowly within the first 12 hours, indicating the gradual decomposition of their lacunary structures. After that, the intensity was nearly unchanged for the rest of the analysis time, suggesting that a dissociation equilibrium might be reached (Fig. S4†).⁴⁴ The kinetically stable nature of the species was then verified using ESI-MS study. Apart from the dissociated fragments of different charges and compositions, the envelopes belonging to the intact polyanions were clearly identified. For SeAs₃Mo₁₀, the peaks centered at m/z = 822.90 and 1234.42 can be assigned to the −3 charged {SeAs₃Mo₁₀(H₂O)₁₅}³⁻ and −2 charged {(NH₄)SeAs₃Mo₁₀(H₂O)₁₄}²⁻, respectively (Fig. 2c). For Se₂As₂Mo₁₀, the peak situated at m/z = 1207.55 corresponds to the −2 charged species of {(NH₄)₂Se₂As₂Mo₁₀(H₂O)₁₅}²⁻ (Fig. 2d). Additional MS assignments for the major peaks are summarized in Table S2.† In addition, the pH-dependent UV-vis spectra showcased that the position and intensity of the bands were shifted, suggesting the rapid deformation of SeAs₃Mo₁₀ and Se₂As₂Mo₁₀ upon a rise in pH (Fig. 2e and f). The data from the above studies suggest that the lacunary SeAs₃Mo₁₀ and Se₂As₂Mo₁₀ species may have adequate kinetic stability for being used as precursors for successive reactions at specific pH. Furthermore, the crystallinity of SeAs₃Mo₁₀ and Se₂As₂Mo₁₀ is well retained in many kinds of organic solvents, as shown by the powder XRD patterns (Fig. 2g and h). Meanwhile, the frameworks of the lacunary species remain intact up to 220 °C, as indicated by the thermogravimetric analysis (Fig. 2i). The outstanding chemical and thermal stability of SeAs₃Mo₁₀ and Se₂As₂Mo₁₀ indicate their potential as heterogeneous catalysts for various organic syntheses.

Fig. 2 (a) and (b) UV-vis spectra of aqueous solutions containing SeAs₃Mo₁₀ and Se₂As₂Mo₁₀ at various time intervals. (c) and (d) Negative-ion mass spectra of SeAs₃Mo₁₀ and Se₂As₂Mo₁₀. (e) and (f) UV-vis spectra of the aqueous solution containing SeAs₃Mo₁₀ and Se₂As₂Mo₁₀ at different pH conditions. (g) and (h) Powder XRD patterns of SeAs₃Mo₁₀ and Se₂As₂Mo₁₀ after soaking in different organic solvents for 24 h. (i) Thermogravimetric curves of SeAs₃Mo₁₀ and Se₂As₂Mo₁₀.

To examine the coordination ability of SeAs₃Mo₁₀, Ce^III ions were added into the reaction system followed by the successful isolation of a dimeric assembly, [{Ce(H₂O)₆(SeO₃)(p-H₃NC₆H₄AsO₃)₃Mo₁₀O₂₉}₂] (Se₂As₆Mo₂₀Ce₂). It should be noted that the synthesis of Se₂As₆Mo₂₀Ce₂ could be achieved using SeAs₃Mo₁₀ as the precursor or via an in situ self-assembly. As shown in Fig. 3a, the structure of Se₂As₆Mo₂₀Ce₂ is comprised of two polyanionic SeAs₃Mo₁₀ moieties, which are bridged by two Ce^III cations in the belt position, resulting in a rare electroneutral Mo–oxo cluster. Every Ce^III center is coordinated with three oxygen atoms from the terminal Mo=O groups together with six water molecules. Of particular interest, the Ce^III ions did not fill the lacuna of SeAs₃Mo₁₀, which is in complete contrast to the lacunary POW counterparts. This might also be attributed to the effect of the lone pair electrons on the {SeO₃} group next to the opening. Such rare behaviors have been encountered before, which demonstrate again the “non-classical” nature of lacunary inverted Keggin ions.^45,46 According to previous findings, the plenary As₄Mo₁₂ is difficult to react with electrophiles because of its electroneutrality. More importantly, the protruding organic arms with protonated aniline groups would obstruct cation access to a large extent (Fig. 3b). In contrast, the anionic SeAs₃Mo₁₀ with an open-shell configuration allows sufficient contact with metal ions, demonstrating its coordination ability (Fig. 3c). The successful combination of SeAs₃Mo₁₀ and Ce^III was also verified using FT-IR spectroscopy. In the spectrum of Se₂As₆Mo₂₀Ce₂, the split of the peak centered at 914 cm⁻¹ (SeAs₃Mo₁₀) signals the change in vibrations of Mo–oxo framework (Fig. 3d).⁴¹ Meanwhile, the presence of the Ce^III ions was verified through EDX and XPS analysis as well (Fig. 3e and f). The peaks at 904.6 and 901.1 eV as well as at 886.6 and 881.8 eV are, respectively, located in the Ce 3d_3/2 and Ce 3d_5/2 energy region, which are in line with the Ce^III oxidation state.^47–49

Fig. 3 (a) Structural representation of Se₂As₆Mo₂₀Ce₂. Color code: {MoO₆}, dark blue octahedra; Ce, yellow; As, green; Se, pink; C, gray; N, blue; O, red. (b) Inhibition of coordination caused by the sterically hindered organic arms with positively charged quaternary ammonium groups in As₄Mo₁₂. (c) Anionic SeAs₃Mo₁₀ with an open-shell configuration. (d) FT-IR spectra of SeAs₃Mo₁₀ and Se₂As₆Mo₂₀Ce₂. (e) EDX analysis of Se₂As₆Mo₂₀Ce₂. (f) XPS spectrum of Se₂As₆Mo₂₀Ce₂.

Based on the enriched metallic centers, outstanding chemical and thermal stability as well as their pseudo-liquid behaviors, POMs are widely used as heterogeneous catalysts in the fabrication of pharmaceutical intermediates.²⁹ Pyrazole-based medicines, in particular, hold high clinical value and are extensively used as anti-inflammatory drugs, for sedation, pain relief, and other applications.⁵⁰ The ever increasing demand for pyrazoles has promoted the rapid development of their synthetic techniques.⁵¹ Recently, the potential of POMs as Lewis acid–base catalysts in the dehydration condensation reaction of hydrazines and 1,3-dicarbonyls has been tapped, which has created an efficient route for the preparation of pyrazoles.^38,52–59 In this context, the catalytic performance of the as-made polyanions and As₄Mo₁₂ has been systematically evaluated and compared to reveal the structure–activity relationships of this inverted Keggin family.

Taking the condensation–cyclization of p-toluenesulfonyl hydrazide (1a) and acetylacetone (2a) as the model reaction, the optimal conditions were investigated (Table S3†). Follow-up experiments were performed at room temperature (RT) for 10 min to screen the activity of different catalysts. As shown in Fig. 4a and Table S4,† the yield of the desired product reached 28% without any catalyst. Using the starting materials (NH₄)₆Mo₇O₂₄·4H₂O, p-H₂NC₆H₄AsO₃H₂, SeO₂, and their mixture as catalysts, yields of 47%, 45%, 54%, and 51% were attained, respectively. Meanwhile, a yield of 56% was observed using As₄Mo₁₂ as the catalyst. In contrast, the lacunary SeAs₃Mo₁₀ and Ce^III-incorporated Se₂As₆Mo₂₀Ce₂ have been found to effectively promote the yield to 61% and 68%, respectively. Surprisingly, a high yield of 99% was attained using Se₂As₂Mo₁₀ under mild conditions, which represents one of the best POM catalysts for the preparation of pyrazoles (Table S5†).^38,52–59 The desired product was obtained in 98% yield using Se₂As₂Mo₁₀ as the catalyst during the first 5 min of the reaction (Fig. 4b). However, for SeAs₃Mo₁₀ and Se₂As₆Mo₂₀Ce₂, a similar yield of ≥98% was achieved after 90 and 40 min, respectively, indicating that Se₂As₂Mo₁₀ has the best activity of the inverted Keggin POMos. The heterogeneous catalytic nature of the as-made compounds was validated using a filtration test (Fig. 4c and S5†). As exemplified by Se₂As₂Mo₁₀, the yield (81%) barely changed after the removal of catalysts from the reaction at the third min. Moreover, SEM and BET characterizations were carried out on the as-made catalysts. As shown in Fig. S6,† there was no obvious difference in the size distribution of the three catalysts, with an average diameter of ca. 3 μm. Their specific surface areas were analyzed through N₂ adsorption experiments at 77 K. As depicted in Fig. S7,† all three compounds displayed type II adsorption isotherms, indicating their non-porous nature. After activation, the total adsorption capacities of SeAs₃Mo₁₀, Se₂As₂Mo₁₀ and Se₂As₆Mo₂₀Ce₂ are 6.06, 6.15 and 4.65 cm³ g⁻¹, respectively, with specific surface areas of 4.41, 4.68 and 3.07 m² g⁻¹, respectively. Therefore, there is not much difference in their specific surface areas. Based on the above, the different catalytic activities of the as-made compounds might be mainly attributed to the differences in their molecular structures. Due to the pseudo-liquid behavior of POMs as heterogeneous catalysts, substrates can react not only on the surface of the POM catalysts but deep in their crystal lattices also.²⁹ Therefore, the structural and physicochemical features of the catalysts play a crucial role in the catalytic reactions. Additionally, these catalysts could be easily separated and reused for at least six cycles, and the average yield is still above 95% (Fig. 4d–f). No obvious changes were observed in the powder XRD patterns (Fig. 4g–i) and FT-IR spectra (Fig. S8†) of these compounds before and after the catalytic reactions. On the basis of the above mentioned findings, the as-made polyanions, particularly Se₂As₂Mo₁₀, are found to be heterogeneous catalysts of outstanding activity and stability.

Fig. 4 (a) Catalytic efficiency of the different catalysts in the model reaction ((A) SeAs₃Mo₁₀; (B) Se₂As₂Mo₁₀; (C) Se₂As₆Mo₂₀Ce₂; (D) As₄Mo₁₂; (E) (NH₄)₆Mo₇O₂₄·4H₂O; (F) p-H₂NC₆H₄AsO₃H₂; (G) SeO₂; (H) mixture; (I) no catalyst). (b) Catalytic efficiency of SeAs₃Mo₁₀ (A), Se₂As₂Mo₁₀ (B), and Se₂As₆Mo₂₀Ce₂ (C) as a function of time. (c) Results of the filtration test conducted on the Se₂As₂Mo₁₀ heterogeneous catalyst. (d)–(f) Catalytic stability of SeAs₃Mo₁₀ (d), Se₂As₂Mo₁₀ (e), and Se₂As₆Mo₂₀Ce₂ (f) (error bar ± 1%). (g)–(i) Powder XRD patterns of SeAs₃Mo₁₀, Se₂As₂Mo₁₀, and Se₂As₆Mo₂₀Ce₂ before and after catalysis.

Next, a cross combination of different kinds of hydrazines/hydrazides (1a–1d) and 1,3-diketones (2a–2c) containing various substituent groups were employed to evaluate the catalytic activity of the as-made compounds. As recorded in Table 1, satisfactory catalytic efficiency (yield ≥ 99%) was obtained. In terms of the reaction time and temperature, Se₂As₂Mo₁₀ still demonstrated the best performance of the three catalysts. Moreover, from an industrial point of view, the feasibility of mass production is a critical element to be considered. Therefore, the catalytic performance at 10 times scale was examined for the reaction of 1d and 2a. The gram-scale production of 3j (yield ≥ 99%) went smoothly in the presence of SeAs₃Mo₁₀ (RT, 90 min), Se₂As₂Mo₁₀ (RT, 10 min), and Se₂As₆Mo₂₀Ce₂ (RT, 90 min). Regarding all the reactions mentioned above, the structure and purity of the targeted products were validated using NMR spectroscopy (Fig. S9 and S20†).

Table 1 Substrate scope of the SeAs₃Mo₁₀, Se₂As₂Mo₁₀, and Se₂As₂Mo₂₀Ce₂-catalyzed condensation–cyclization reaction^a

Entry	Hydrazine/hydrazide	1,3-Diketone	SeAs3Mo10	Se2As2Mo10	Se2As6Mo20Ce2	Product	Yield^b (%)
a Reaction conditions: hydrazine/hydrazide 1 (0.2 mmol), 1,3-diketone 2 (0.2 mmol), catalyst (1.5 mol%), and DMC (dimethyl carbonate, 0.5 mL) at different reaction temperatures and times. b Isolated yields.
1			RT, 90 min	RT, 10 min	RT, 30 min	3a	99
2			60 °C, 120 min	60 °C, 30 min	60 °C, 60 min	3b	99
3			80 °C, 60 min	60 °C, 120 min	80 °C, 30 min	3c	99
4			60 °C, 90 min	60 °C, 30 min	60 °C, 60 min	3d	99
5			60 °C, 120 min	60 °C, 60 min	60 °C, 90 min	3e	99
6			80 °C, 120 min	60 °C, 120 min	80 °C, 60 min	3f	99
7			60 °C, 90 min	60 °C, 30 min	60 °C, 60 min	3g	99
8			80 °C, 30 min	60 °C, 60 min	80 °C, 30 min	3h	99
9			100 °C, 120 min	80 °C, 120 min	100 °C, 60 min	3i	99
10			RT, 90 min	RT, 10 min	RT, 90 min	3j	99
11			60 °C, 120 min	60 °C, 30 min	60 °C, 60 min	3k	99
12			80 °C, 120 min	80 °C, 30 min	80 °C, 60 min	3l	99

---

To understand the advantages that the Se₂As₂Mo₁₀ catalyst has, compared with the other inverted Keggin POMos employed in this work, several structural factors must be considered. First of all, from As₄Mo₁₂viaSeAs₃Mo₁₀ to Se₂As₂Mo₁₀, the enclosed structure has been gradually opened up mainly due to the loss of {p-H₃NC₆H₄AsO₃} groups with significant steric hindrance (Fig. 5a–c). As a consequence, Se₂As₂Mo₁₀ has the most open framework, which is accessible for the contact of substrates.⁵⁶ Secondly, it is noted that the charge of the Mo–oxo clusters evolves from electroneutrality (As₄Mo₁₂) to electronegativity (SeAs₃Mo₁₀ and Se₂As₂Mo₁₀). Accordingly, the molecular electrostatic potential (MEP) maps of the clusters have been calculated and are displayed in Fig. 5d–f. For As₄Mo₁₂, an obviously reduced nucleophilicity was detected as compared with the other two species. Due to the replacement of {p-H₃NC₆H₄AsO₃}⁻ by {SeO₃}²⁻, the increased charges are mainly concentrated on the lacuna of the clusters. Owing to the enlarged electronegative area, the exposed μ-oxo groups could aid the contact with electrophilic hydrazine substrates.⁵⁶ Finally, despite As₄Mo₁₂ and Se₂As₆Mo₂₀Ce₂ having the same electroneutral features, the catalytic activity of the latter was significantly enhanced as compared to that of the former. Meanwhile, the catalytic performance of Se₂As₆Mo₂₀Ce₂ is also better than that of the SeAs₃Mo₁₀ precursor. This could be attributed to the incorporation of the Ce^III ions, of which the large size and positively charged nature provide suitable environments for the access of substrates (Fig. 5g).⁵⁹ To further verify the advantages of the as-made compounds as Lewis-acid–base catalysts, the preparation of another medical intermediate, 2-phenyl-2,3-dihydroquinazolin-4(1H)-one, via the acetalization of 2-aminobenzamide and benzaldehyde has been carried out. Based on the data listed in Table S6 and Fig. S21,† the as-made compounds could catalyze the reaction in a more cost-effective way, saving time and energy. In particular, Se₂As₂Mo₁₀ still behaved the best of the three compounds and the other reported catalysts, which is in agreement with the findings of the pyrazole syntheses.^60,61 To sum up, the combination of an open-shell configuration and electronegative character are mainly responsible for the superior catalytic activity of Se₂As₂Mo₁₀, demonstrating the structural advantages of the lacunary inverted Keggin archetype.

Fig. 5 (a)–(c) Transition of the Mo–oxo frameworks from fully closed (As₄Mo₁₂ (a)) to gradually open structures (SeAs₃Mo₁₀ (b); Se₂As₂Mo₁₀ (c)). (d)–(e) Molecular electrostatic potential (MEP) distribution (isovalue 0.02) for As₄Mo₁₂ (d), SeAs₃Mo₁₀ (e), and Se₂As₂Mo₁₀ (f). The red areas are more nucleophilic regions. (g) Proposed catalytic synergistic effect of the Ce^III ions in Se₂As₆Mo₂₀Ce₂. Color code: Ce, yellow; Mo, cyan; O, red.

Conclusions

After a hundred years of waiting, the use of a synthesis that relies on binary heterogroups has succeeded in making an inverted Keggin ion lacunary. In addition to the removal of addenda, the enclosed Mo–oxo framework of the inverted Keggin has been opened up, thus allowing further development of the structure. These kinetically stable vacant species are suitable precursors to advance the synthetic chemistry of POMos via a building block approach. Aside from the breakthrough relating to structural control, a combination of advantageous properties, including reduced steric hindrance, tunable charge distribution, and diversified composition, makes these polyanions behave as Lewis-acid–base catalysts. Fine chemicals such as pyrazoles could be produced in large quantity with ultrahigh efficiency. It can be foreseen that, as more efforts are devoted to the emerging area of lacunary inverted Keggin ions, the field of POM research shall be rejuvenated.

Data availability

Experimental details (e.g., synthesis of compounds and procedure of catalytic experiments), characterization of the compounds (e.g., XPS spectra, FT-IR spectra, NMR spectra, and TG curves), and tables (e.g., crystallographic and refinement data, values of BVS calculations, assignments for the main peaks in the ESI-MS spectra).

Author contributions

P. Y. conceived the project and designed the experiments. L.-L. L., Z.-Y. X. and P. Y. performed the experiments and analyzed the data. C.-Q. C. helped with the elemental analysis. Z.-L. L. carried out the MEP calculations. L.-L. L. drafted the manuscript. All the authors discussed the results and commented on the manuscript.

Conflicts of interest

The authors declare no conflict of interest.

Acknowledgements

This research was financially supported by the Natural Science Foundation of Hunan Province (2022JJ20007), the Science and Technology Innovation Program of Hunan Province (2022RC1115), the Natural Scientific Foundation of Jilin Province Science and Technology Department (20230101032JC), and the Foundation of Jilin Educational Committee (JJKH20231298KJ). Single-crystal X-ray diffraction data were acquired at the Analytical Instrumentation Center of Hunan University.

References

1. J. Berzelius, Ann. Phys., 1826, 6, 369–380.
2. J. F. Keggin, Nature, 1933, 131, 908–909.
3. S. E. Smart, J. Vaughn, I. Pappas and L. Pan, Chem. Commun., 2013, 49, 11352–11354.
4. J. Roswell and L. F. Nazar, J. Am. Chem. Soc., 2000, 122, 3777–3778.
5. D. C. Hutchison, R. D. Stern, M. R. Olsen, L. N. Zakharov, K. A. Perssonb and M. Nyman, Dalton Trans., 2018, 47, 9804–9813.
6. V. Baskar, M. Shanmugam, M. Helliwell, S. J. Teat and R. E. P. Winpenny, J. Am. Chem. Soc., 2007, 129, 3042–3043.
7. N. Li, J. Liu, J.-J. Liu, L.-Z. Dong, S.-L. Li, B.-X. Dong, Y.-H. Kan and Y.-Q. Lan, Angew. Chem., Int. Ed., 2019, 58, 17260–17264.
8. O. Sadeghi, L. N. Zakharov and M. Nyman, Science, 2015, 347, 1359–1362.
9. E. V. Chubarova, M. H. Dickman, B. Keita, L. Nadjo, F. Miserque, M. Mifsud, I. W. C. E. Arends and U. Kortz, Angew. Chem., Int. Ed., 2008, 47, 9542–9546.
10. P. Yang and U. Kortz, Acc. Chem. Res., 2018, 51, 1599–1608.
11. J.-X. Liu, X.-B. Zhang, Y.-L. Li, S.-L. Huang and G.-Y. Yang, Coord. Chem. Rev., 2020, 414, 213260.
12. H. Debray, C. R. Hebd. Seances Acad. Sci., 1874, 78, 1411.
13. T. Nishikawa and Y. Sasaki, Chem. Lett., 1975, 4, 1185–1186.
14. M. Filowitz and W. G. Klemperer, J. Chem. Soc., Chem. Commun., 1977, 7, 201–202.
15. K. M. Barkigia, L. M. Rajkovic-Blazer, M. T. Pope and C. O. Quicksall, Inorg. Chem., 1981, 20, 3318–3323.
16. B. J. S. Johnson, R. C. Schroden, C. Zhu and A. Stein, Inorg. Chem., 2001, 40, 5972–5978.
17. B. J. S. Johnson, R. C. Schroden, C. Zhu, V. G. Young and A. Stein, Inorg. Chem., 2002, 41, 2213–2218.
18. B. J. S. Johnson, S. A. Geers, W. W. Brennessel, V. G. Young and A. Stein, Dalton Trans., 2003, 24, 4678–4681.
19. E. Burkholder, S. Wright, V. Golub, C. J. O'Connor and J. Zubieta, Inorg. Chem., 2003, 42, 7460–7471.
20. E. Burkholder and J. Zubieta, Inorg. Chim. Acta, 2004, 357, 301–304.
21. T. Ueda, T. Yonemura, M. Shiro, M. Fukudome and M. Hojo, Inorg. Chem. Commun., 2007, 10, 1301–1303.
22. B. Liu, Z.-T. Yu, J. Yang, W. Hua, Y.-Y. Liu and J.-F. Ma, Inorg. Chem., 2011, 50, 8967–8972.
23. J. Fielden, K. Quasdorf, L. Cronin and P. Kögerler, Dalton Trans., 2012, 41, 9876–9878.
24. T. Ueda, K. Machida, M. Shiro and D. Kaneno, Inorg. Chem. Commun., 2013, 38, 123–126.
25. M.-S. Liu, W.-D. Yu, Q.-W. Yan and J. Yan, Eur. J. Inorg. Chem., 2017, 2017, 1947–1950.
26. X.-X. Zhang, H. Yuan, W.-D. Yu, Y.-Y. Gu and J. Yan, Inorg. Chem. Commun., 2018, 91, 77–80.
27. X. Ma, S. Bhattacharya, D. H. Taffa, T. Nisar, M. Wark, V. Wagner and U. Kortz, Inorg. Chem., 2023, 62, 1813–1819.
28. L.-L. Liu, L. Wang, X.-Y. Xiao, P. Yang, J. Zhao and U. Kortz, Coord. Chem. Rev., 2024, 506, 215687.
29. S.-S. Wang and G.-Y. Yang, Chem. Rev., 2015, 115, 4893–4962.
30. J.-C. Liu, J.-W. Zhao, C. Streb and Y. F. Song, Coord. Chem. Rev., 2022, 471, 214734.
31. M. Aureliano, N. I. Gumerova, G. Sciortino, E. Garribba, C. C. McLauchlan, A. Rompel and D. C. Crans, Coord. Chem. Rev., 2022, 454, 214344.
32. H. N. Miras, J. Yan, D.-L. Long and L. Cronin, Chem. Soc. Rev., 2012, 41, 7403–7430.
33. D. E. S. Marcano, N. D. Savić, K. Declerck, S. A. M. Abdelhameed and T. N. Parac-Vogt, Chem. Soc. Rev., 2024, 53, 84–136.
34. L. A. Combs-Walker and C. L. Hill, Inorg. Chem., 1991, 30, 4016–4026.
35. J. Hao, J. Zhang, P. C. Yin, Z. C. Xiao, F. P. Xiao and Y. G. Wei, Chem.–Eur. J., 2012, 18, 2503–2506.
36. C. Li, N. Mizuno, K. Yamaguchi and K. Suzuki, J. Am. Chem. Soc., 2019, 141, 7687–7692.
37. C. Li, K. Yamaguchi and K. Suzuki, Angew. Chem., Int. Ed., 2021, 60, 6960–6964.
38. L.-L. Liu, Y.-H. Wang, X.-Y. Xiao, K.-W. Tong, Y. Zhao, C.-Q. Chen, J. Du and P. Yang, Rare Met., 2023, 42, 3345–3353.
39. W. N. Lipscomb, Inorg. Chem., 1965, 4, 132–134.
40. L. Liu, J. Jiang, X. Liu, G. Liu, D. Wang, L. Chen and J. Zhao, Inorg. Chem. Front., 2020, 7, 4640–4651.
41. K. Nakamoto, Infrared and Raman Spectra of Inorganic and Coordination Compounds-Part A: Theory and Applications in Inorganic Chemistry, Wiley and Sons, New York, 5th edn, 1997.
42. I. D. Brown and D. Altermatt, Acta Crystallogr., Sect. B: Struct. Sci., 1985, 41, 244–247.
43. H. So and M. T. Pope, Inorg. Chem., 1972, 11, 1441–1443.
44. P. R. Wu, C. H. Wang, Y. W. Chen, Y. J. Lin, T. Ide, Y. Tsuchido, Y. Seid and M. Horie, J. Mater. Chem. C, 2022, 10, 4306–4316.
45. L. Li, Q. Shen, G. Xue, H. Xu, H. Hu, F. Feng and J. Wang, Dalton Trans., 2008, 5698–5700.
46. M. Xu, T. Wang, F. Li, W. Xu, Y. Zheng and L. Xu, Chem. Commun., 2020, 56, 1097–1100.
47. P. W. Park and J. S. Ledford, Langmuir, 1996, 12, 1794–1799.
48. H.-X. Sheng, B.-Y. Lin, C.-Q. Chen, J. Du and P. Yang, Polyoxometalates, 2024, 3, 9140060.
49. Y. Zhao, C.-L. Li, C.-Q. Chen, J. Du, U. Kortz, T. Gong and P. Yang, Inorg. Chem. Front., 2024, 11, 1413–1422.
50. Z. Xu, C. Gao, Q.-C. Ren, X.-F. Song, L.-S. Feng and Z.-S. Lv, Eur. J. Med. Chem., 2017, 139, 429–440.
51. S. Fustero, M. Sánchez-Roselló, P. Barrio and A. Simón-Fuentes, Chem. Rev., 2011, 111, 6984–7034.
52. G.-P. Yang, X.-L. Zhang, Y.-F. Liu, D.-D. Zhang, K. Li and C.-W. Hu, Inorg. Chem. Front., 2021, 8, 4650–4656.
53. K. Li, Y.-F. Liu, X.-L. Lin and G.-P. Yang, Inorg. Chem., 2022, 61, 6934–6942.
54. M.-Y. Yao, Y.-F. Liu, X.-X. Li, G.-P. Yang and S.-T. Zheng, Chem. Commun., 2022, 58, 5737–5740.
55. Y.-F. Liu, C.-W. Hu and G.-P. Yang, Chin. Chem. Lett., 2023, 34, 108097.
56. G.-P. Yang, X. He, B. Yu and C. W. Hu, Appl. Organomet. Chem., 2018, 32, e4532.
57. G. Yang, Y. Liu, X. Lin, B. Ming, K. Li and C. Hu, Chin. Chem. Lett., 2022, 33, 354–357.
58. G.-P. Yang, S.-X. Shang, B. Yu and C.-W. Hu, Inorg. Chem. Front., 2018, 5, 2472–2477.
59. M. Cheng, Y. Liu, W. Du, J. Shi, J. Li, H. Wang, K. Li, G. Yang and D. Zhang, Chin. Chem. Lett., 2022, 33, 3899–3902.
60. V. Jeevananthan, G. C. Senadi, K. Muthu, A. Arumugam and S. Shanmugan, Inorg. Chem., 2024, 63, 5446–5463.
61. K. Li, Y. F. Liu, G. P. Yang, Z. J. Zheng, X. L. Lin, Z. B. Zhang, S. J. Li, Y. H. Liu and Y. G. Wei, Green Chem., 2024, 26, 6454–6460.

---

Footnote

† Electronic supplementary information (ESI) available. CCDC 2367552–2367554. For ESI and crystallographic data in CIF or other electronic format see DOI: https://doi.org/10.1039/d4sc04634j

---