Issue 8, 2020

Adsorption of crude oil from crude oil–water emulsion by mesoporous hafnium oxide ceramics

Abstract

We report a mesoporous hafnium oxide (MHO) ceramic synthesized via a sol–gel process that has exhibited 99.9% removal capacity of crude oil from an oil-in-water emulsion at a concentration of 3 mg mL−1. The as-prepared MHO ceramic was regenerated after crude oil sequestration via calcination at 800 °C under ambient conditions. The scalability of the synthetic method and thermal stability of the MHO ceramic material makes it a promising, underexplored, and reusable adsorbent for efficient oil spill clean-up.

Graphical abstract: Adsorption of crude oil from crude oil–water emulsion by mesoporous hafnium oxide ceramics

Supplementary files

Article information

Article type
Communication
Submitted
08 Mei 2020
Accepted
25 Jun 2020
First published
26 Jun 2020

Environ. Sci.: Water Res. Technol., 2020,6, 2035-2042

Author version available

Adsorption of crude oil from crude oil–water emulsion by mesoporous hafnium oxide ceramics

F. A. Hussain, J. Zamora, I. M. Ferrer, M. Kinyua and J. M. Velázquez, Environ. Sci.: Water Res. Technol., 2020, 6, 2035 DOI: 10.1039/D0EW00451K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements