Issue 10, 2012

Fabrication of CuInS2–TiO2 composite fibers by using electrospinning coupled with solvothermal method

Abstract

The electrospinning method combined with a solvothermal technique is employed to prepare TiO2 fibers wrapped with zincblende CuInS2. The as prepared composite fibers showed a great absorption in the whole visible region, and the photocurrent responses of the composite fibers under visible light illumination were greatly enhanced.

Graphical abstract: Fabrication of CuInS2–TiO2 composite fibers by using electrospinning coupled with solvothermal method

Article information

Article type
Communication
Submitted
02 Jan 2012
Accepted
01 Mar 2012
First published
02 Mar 2012

RSC Adv., 2012,2, 4055-4058

Fabrication of CuInS2–TiO2 composite fibers by using electrospinning coupled with solvothermal method

H. Cao, Y. Zhu, X. Yang and C. Li, RSC Adv., 2012, 2, 4055 DOI: 10.1039/C2RA00003B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements